First Car To Die On The Way To A Meet

Talk about your Rotaries!
User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Jan 14, 2008 9:14

For all who don't already know.
I was on my way to the car wash and I hit 5k and the car started sputtering. I went and washed my car at Chapel Hills Mall, I even got the motor all nice and clean. After the car wash the car started fine but would not run right. I thought it might be the carb. I took it for a quick drive around the mall parking lot. I then stopped in a parking space and the car stalled. I went to try and start it back up and it would not turn over. I tried to turn it over by hand and it wont budge. My guess is it blew at least 1 apex seal in the rear and jammed the rotor. I guess 178k is what that motor lasted to.

Thanks to all who gave me a ride on Saturday. I had a great time at the meet, helped me to not think of the car.

I left the car at the mall that night and I worried about if all night. I made my wife take me on a Sunday morning drive by. The car is now safe at home.

The car will be brought back to life. I will start taring into it soon. I may work on the body while I wait for the new motor to come in. I will keep everyone posted as this progresses.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

MazdaTom
Posts: 2191
Joined: Fri Sep 21, 2007 9:14
Location: Highlands Ranch
Contact:

Postby MazdaTom » Mon Jan 14, 2008 9:14

No more magical spinning dorrito for you! But 178,000 miles out of it is a pretty good run. Sucks anyway though.

You can turn over the motor "by hand" on an RX-7?
[SIGPIC][/SIGPIC]
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come

Huzer21

Postby Huzer21 » Mon Jan 14, 2008 9:14

Ah, bummer. That sucks. Glad you were able to get the car home ok.

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Jan 14, 2008 9:14

Yes you can turn a rotory by hand. No backpressure, makes it hard to stay on a hill with no parking brake.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Mon Jan 14, 2008 9:14

<div class='quotetop'>QUOTE (RX-7 Chris @ Jan 14 2008, 09:37 AM) [url=index.php?act=findpost&pid=18063]<{POST_SNAPBACK}>[/url]</div>
Yes you can turn a rotory by hand. No backpressure, makes it hard to stay on a hill with no parking brake.[/b]


178k miles...wow..you rebuilding or swapping? B)
"20<cut off="">"</cut>

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Jan 14, 2008 9:14

I will be swapping in a streetport 12a. I am going to be looking into the finances this week. The setup I want is going to cost about $3k. I will be putting a holley carb setup unless I can get something else used for cheaper.

If anyone has a carb setup for a streetport 12a, PM me.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Mon Jan 14, 2008 9:14

<div class='quotetop'>QUOTE (RX-7 Chris @ Jan 14 2008, 10:19 AM) [url=index.php?act=findpost&pid=18082]<{POST_SNAPBACK}>[/url]</div>
I will be swapping in a streetport 12a. I am going to be looking into the finances this week. The setup I want is going to cost about $3k. I will be putting a holley carb setup unless I can get something else used for cheaper.

If anyone has a carb setup for a streetport 12a, PM me.[/b]



wow g/l with this setup....can't wait to see the finished product.
"20<cut off="">"</cut>

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Jan 14, 2008 9:14

The main thing I am looking for is the carb setup.
I would prefer a holley setup but I would be happy with whatever right now.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
Colombia28
Posts: 4216
Joined: Wed Sep 19, 2007 9:14
Location: Lone Tree
Contact:

Postby Colombia28 » Mon Jan 14, 2008 9:14

:( Sorry to hear that happened. Cant wait to see it again all fixed up and running smooth!
Image
2008 Cosmic Blue Speed3 - NEW :D
2006 Copper Red Mica 3 hatch - SOLD :(
ΜΟΛΩΝ ΛΑΒΕ

User avatar
goldrocket
Posts: 857
Joined: Wed Oct 31, 2007 9:14
Location: Colorado Springs
Contact:

Postby goldrocket » Mon Jan 14, 2008 9:14

Hey Chris, I don't know if you have been there or not, but go to Mazdspeed.com and post what you are looking for. That is the all first gen website i told you about on Saturday. I would be willing to bet you'll find the Holley or a weber setup from one of they guys there. They are all pretty cool and they have a ton of parts, cars and knowledge. If you are still unsure about who to build you engine I can tell you from experience and TWO blown apex seals that Rotary Warehouse is awesome. I didn't need to replace a housing on mine, and I'm sure most builders would be quick to prey upon the possibility of needing an expensive part like a rotor housing. Here is the link Rotary Warehouse The engine I got is a stage 4 13b four port. A stage 4 12a will cost you under 3K.
Al says
Anything worth doing is worth overdoing!:eek:

Image

User avatar
goldrocket
Posts: 857
Joined: Wed Oct 31, 2007 9:14
Location: Colorado Springs
Contact:

Postby goldrocket » Mon Jan 14, 2008 9:14

<div class='quotetop'>QUOTE (MazdaTom @ Jan 14 2008, 09:24 AM) [url=index.php?act=findpost&pid=18060]<{POST_SNAPBACK}>[/url]</div>
No more magical spinning dorrito for you! But 178,000 miles out of it is a pretty good run. Sucks anyway though.

You can turn over the motor "by hand" on an RX-7?[/b]


Magical dorito?!?!?! ROFL!!!! That's jacked up! And yes, the lack of valves and heads makes it easy to turn a rotary engine over by hand.
Al says
Anything worth doing is worth overdoing!:eek:

Image

rx8ghost
Senior Member
Posts: 866
Joined: Sun Dec 16, 2007 9:14
Location: Colorado Springs
Contact:

Postby rx8ghost » Mon Jan 14, 2008 9:14

<div class='quotetop'>QUOTE (goldrocket @ Jan 14 2008, 07:36 PM) [url=index.php?act=findpost&pid=18199]<{POST_SNAPBACK}>[/url]</div>
Magical dorito?!?!?! ROFL!!!! That's jacked up! And yes, the lack of valves and heads makes it easy to turn a rotary engine over by hand.[/b]


Everyday someone has a comment to make about me having a rotary and everyday I have something new to explain why it's better :D
[SIGPIC][/SIGPIC]
Mods:
Veilside D1-GT Body kit, Axailflow Short Shifter, Innovate LC-1 Wideband, Proshift Gauges, Greddy Turbo Kit w/ Cobb AccessPORT, TurboXS exhaust w/ race pipe, CarPC, Synapse BOV, AEM Intake

User avatar
Colombia28
Posts: 4216
Joined: Wed Sep 19, 2007 9:14
Location: Lone Tree
Contact:

Postby Colombia28 » Mon Jan 14, 2008 9:14

I love rotary motors, but the dorito comment is hilarious!
Image
2008 Cosmic Blue Speed3 - NEW :D
2006 Copper Red Mica 3 hatch - SOLD :(
ΜΟΛΩΝ ΛΑΒΕ

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Tue Jan 15, 2008 9:14

I don't really need a nikki setup but there are other things a need.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Tue Jan 15, 2008 9:14

If it is a GSL than it sould have these parts.
power window regulators with motors
power window switches
rear wiper setup (motor and arm)
There may be other stuff I can't think of.
if the body is good
front fenders
driver side door

I would by the car but I have no where to put it.
I could drive up there and take it all off myself if needed.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog


Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 68 guests