My New Toy
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
I plan to finish reinstalling the interior this week.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
RX-7 Chris wrote:Thanks.
The car is finally getting there. I'm going to stop by and see it today.
What was left to do as of last weekend:
-paint hood, bumpers, cowl STARTED
-wet sand and polish hood, bumpers, cowl (after paint)
-install hood, bumpers, cowl, rear glass, etc (I will be helping)
-wheel well rust repair DONE
-install exhaust heat shield (tabs to be welded with rust repair)
-repair and paint rear louvers (need to drill rivets and drop off at welder) STARTED
-wheel clear coat (already preped by me) STARTED
-side moulding install
-side moulding finish STARTED
-windshield moulding install
-pinstriping
-rear interior install (I will be doing, 1-2 hour total) STARTED
-install seals, emblems, stickers, etc (I will be doing)
Once the car is done with paint:
-alignment
-new tires
-replace carpet (have in garage)
-driver's seat repair (sometime this year)
-metal sunroof headliner in brown (done with seat)
-rear suspension bushing replacement (bushings sitting in garage) DONE
-paint rear suspension (have paint) DONE
Looks like a long list but it isn't as bad as it sounds.
Getting better
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- speedjunkie
- Senior Member
- Posts: 5337
- Joined: Wed Jan 02, 2008 9:14
- Location: Colorado Springs
- Contact:
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
speedjunkie wrote:Is that an April Fool's joke? lol
haha I didn't even think about that.
That stuff is actually done. I'm going to work on the interior tonight.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
I installed the rear interior last night. It took about an hour and a half.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
The lower rear valance (body part below the rear bumper) is now painted as of last night. The black top of the doors and black between the rear windows should be painted in the next two days. Once that is done, I can start to put the seals, emblems, door handles, mirrors, etc. back on.
While I install parts, the painter will be painting the bumpers first then painting the hood, front valance, etc.
While I install parts, the painter will be painting the bumpers first then painting the hood, front valance, etc.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
The door locks need to be installed but were still wet when I left so I couldn't get them in. We repaired the left tail light (it was cracked). We made a good one out of two. The tail lights and center panel are now in for good. The license plate brackets are also painted.
The rear bumper, head light buckets, head light lids, hood hinges, and hood latch were ready for color when I left.
The rear bumper, head light buckets, head light lids, hood hinges, and hood latch were ready for color when I left.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- MtnHighRX-7
- Member
- Posts: 62
- Joined: Mon Apr 20, 2009 9:14
- Location: Denver, Colorado
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
MtnHighRX-7 wrote:Comming Soon to a Road near you!
I still have you hood seals.
I'm hoping to get an update this week.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
more progress on the car on Saturday.
bumper all painted:

hood hinges painted:

hood latch painted and installed:

The rear bumper, license plate mount, lights, and plate installed:

door locks installed:


I also installed the painted head light mechanism.
bumper all painted:

hood hinges painted:

hood latch painted and installed:

The rear bumper, license plate mount, lights, and plate installed:

door locks installed:


I also installed the painted head light mechanism.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
Who is online
Users browsing this forum: No registered users and 62 guests






