New FD in Town!

Talk about your Rotaries!
Post Reply
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Fri Mar 30, 2012 9:14

boosted12a wrote:donde hicieron eso? se ve bien!!!!


lo hicieron en front range polishing
Top
eliminster
Senior Member
Posts: 202
Joined: Mon Aug 22, 2011 9:14
Location: colorado springs

Postby eliminster » Fri Mar 30, 2012 9:14

polished parts look good hope you get your ride together soon so we can all go for a cruise sometime.
87 red rx7
running 13b re cosmo motor
03 yellow wrx
yes it is a stock color
00 black s10 zr2
yes i have it to tow cars when they break.
Top
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Fri Mar 30, 2012 9:14

I'm down with that, I haven't done a cruise in a long time.
Top
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Fri Mar 30, 2012 9:14

Got a decent amount of work done today! Installed the intake manifolds, fixed and organized engine harness, installed the v mount kit also made the hot side charge pipe.
Image

Pic of the 3" charge pipe
Image

And my grounding kit
Image
Top
User avatar
speedjunkie
Senior Member
Posts: 5359
Joined: Wed Jan 02, 2008 9:14
Location: Colorado Springs
Contact:
Contact speedjunkie

Postby speedjunkie » Sat Mar 31, 2012 9:14

Did you make that grounding kit? I've never seen that one.

SO MUCH BLING! lol Looks good man.

I'm soooo down for that cruise too, especially after tonight haha.
Image
Top
User avatar
Rx7boy719
Senior Member
Posts: 169
Joined: Thu Aug 11, 2011 9:14
Location: Colorado Springs

Postby Rx7boy719 » Sat Mar 31, 2012 9:14

speedjunkie wrote:Did you make that grounding kit? I've never seen that one.

SO MUCH BLING! lol Looks good man.

I'm soooo down for that cruise too, especially after tonight haha.

Yea lol..... Hopefully next weekend, but the engine looks awesome can't wait to see it in person.....
Top
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Sat Mar 31, 2012 9:14

Thanks Eric, that grounding kit a bought it from ebay fairly cheap. Is an "HKS" kit.
Top
User avatar
chickenwafer
Posts: 2515
Joined: Wed Mar 11, 2009 9:14
Location: Greeley

Postby chickenwafer » Sat Mar 31, 2012 9:14

Looking awesome man
:eek:
Top
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Sat Mar 31, 2012 9:14

I was going to start the car today but I ran to a little problem! One of the AN fitting on the secondary fuel rail won't stop leaking! Pissed me off. Tried everything I could think off, new fitting, teflon tape, no teflon tape, new hose. I checked the male end on the rail and it doesn't look nicked or damaged. Im going to order new fittings and some kind of thread sealant.

Also made a hasty bracket for the breather tank and the AST. Right now im waiting on a 6AN bung for the oil filler neck, so I can drop off the elbow, charge pipe and filler neck at the welder.

edit: After some research online found out that Summit 90 Degree fittings are prone to leak, supposedly the fix to this is buying Aeroquip fittings, so i order them and some conical seals.
Top
User avatar
speedjunkie
Senior Member
Posts: 5359
Joined: Wed Jan 02, 2008 9:14
Location: Colorado Springs
Contact:
Contact speedjunkie

Postby speedjunkie » Sun Apr 01, 2012 9:14

VRx8 wrote:Thanks Eric, that grounding kit a bought it from ebay fairly cheap. Is an "HKS" kit.


I like how you put quotations around HKS lol.

VRx8 wrote:edit: After some research online found out that Summit 90 Degree fittings are prone to leak, supposedly the fix to this is buying Aeroquip fittings, so i order them and some conical seals.


FUUUUUUUUUUU!!!!!!!!!!!!!
Image
Top
User avatar
chickenwafer
Posts: 2515
Joined: Wed Mar 11, 2009 9:14
Location: Greeley

Postby chickenwafer » Mon Apr 02, 2012 9:14

Wow, good thing I didn't do all Summit fittings as I had planned. That sucks.
:eek:
Top
User avatar
speedjunkie
Senior Member
Posts: 5359
Joined: Wed Jan 02, 2008 9:14
Location: Colorado Springs
Contact:
Contact speedjunkie

Postby speedjunkie » Mon Apr 02, 2012 9:14

chickenwafer wrote:Wow, good thing I didn't do all Summit fittings as I had planned. That sucks.


REALLY?! I believe SOMEONE told me Summit had good fittings! I wonder who that could be. What a delta mike LOL!
Image
Top
User avatar
chickenwafer
Posts: 2515
Joined: Wed Mar 11, 2009 9:14
Location: Greeley

Postby chickenwafer » Tue Apr 03, 2012 9:14

Pretty sure I told you eBay fittings were good. Or Summit fittings. I say a lot of things haha
:eek:
Top
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Tue Apr 03, 2012 9:14

Lol I mean they weren't leaking before, it was after I replaced the LIM that i had to take the fuel lines off.
Top
User avatar
speedjunkie
Senior Member
Posts: 5359
Joined: Wed Jan 02, 2008 9:14
Location: Colorado Springs
Contact:
Contact speedjunkie

Postby speedjunkie » Tue Apr 03, 2012 9:14

chickenwafer wrote:Pretty sure I told you eBay fittings were good. Or Summit fittings. I say a lot of things haha


Yeah you told me Summit fittings were good, that's why I bought them LOL.

VRx8 wrote:Lol I mean they weren't leaking before, it was after I replaced the LIM that i had to take the fuel lines off.


Well I don't think mine are leaking, but they're just used for the boost and vent lines on the wastegates, boost control valve solenoid, etc, so I won't really know until I boost. Should be fine though...I hope lol.

Either way, it's awesome you're getting finished too. We're gonna have a good size crew this summer!
Image
Top
Post Reply

Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 149 guests