Zoom Zoom Boom (MSP)

ProjectMSP · Postby **ProjectMSP** » Sun Oct 04, 2009 9:14

like the title says my engine went for a boom.

looks like these engines are pretty weak lol. time to start fresh, really have two options, junk yard motor with rebuild, or find a donor 626 with the 2.5 v6 the donor is looking good to me at this point. i welcome all feedback, ( just not the kind that will get you slapped)

EDIT: got it all tore down saturday at work. Thinking about driving to the shop in the morning and pullin her out. think i might need a tranny too(GREAT)

tbot · Postby **tbot** » Mon Oct 05, 2009 9:14

damn dude, that sucks, sorry to hear. Here's to you getting back on the road soon!

TheNewBlack · Postby **TheNewBlack** » Mon Oct 05, 2009 9:14

Sorry to see that!

tsx_guy · Postby **tsx_guy** » Mon Oct 05, 2009 9:14

A v6 protege?, that might be fun time. Sorry your current motor is no more.

rmeeker13 · Postby **rmeeker13** » Mon Oct 05, 2009 9:14

Put a 13B rotary in it! That would be sick! Im waiting for the day i throw a rod thru the pan on my speed!

ProjectMSP · Postby **ProjectMSP** » Mon Oct 05, 2009 9:14

ya man this isnt fun lol, ive been reading some people been swapping the 2.5 v6 from the 626 in with little trouble, and if thats the case then ill end up turboing that because they can at least take 6 psi and run smoothly.

rmeeker13 · Postby **rmeeker13** » Mon Oct 05, 2009 9:14

Just put a GM LS1 out of a vet in it! There's a 93ish style rx-7 around that has a LS1 in it! If it works in a rx-7, why not a protege!? Dought it would fit tho!

AIM WO4 · Postby **AIM WO4** » Mon Oct 05, 2009 9:14

I'd be up for a rotary 5!

ProjectMSP · Postby **ProjectMSP** » Fri Oct 09, 2009 9:14

alright guys the cars down for a while so im going to request this thread stay open as im going to post progress, pics, and such on what im doing. and if anyone has any parts they dont need, want, cant use, whatever let me know and i might buy them from you. the plan is a whole new build,

since ill have it all out, im adding a front mount, intake, all new fuel injectors, new turbo, and some other engine goodies. wish me luck lol this is gonna be a long journey.

tsx_guy · Postby **tsx_guy** » Fri Oct 09, 2009 9:14

good luck sir!

chickenwafer · Postby **chickenwafer** » Sat Oct 10, 2009 9:14

rmeeker13 wrote:Just put a GM LS1 out of a vet in it! There's a 93ish style rx-7 around that has a LS1 in it! If it works in a rx-7, why not a protege!? Dought it would fit tho!

The Protege engine bay is far smaller and the biggest reason is the Protege isn't rear-wheel drive, so fabricating all the components to make it rear-wheel drive would cost a metric shit ton.

Good luck man, I've seen a lot of these cars blow their motors!

ProjectMSP · Postby **ProjectMSP** » Tue Feb 16, 2010 9:14

UPDATE:

ok guys its been a while since ive been on but FINALLY i can get back to the car. I have the main bearing plate ordered, timing belt, water pump, long block engine, (junkyard) spark plugs injectors on the way. should be starting later this week i will take as many pics and write up as much as i can. its been 5 long months lol.

jdmsp · Postby **jdmsp** » Tue Feb 16, 2010 9:14

Damn just saw this. Sorry about the motor. Were you running stock boost? These motors are def. weak sauce for sure. Sounds like its going to be back and better than ever. cant wait to see the pics!

MSP SuperStreet · Postby **MSP SuperStreet** » Tue Feb 16, 2010 9:14

jdmsp wrote:Damn just saw this.

I also missed this the original post.
Well belated welcome to the ZOOM ZOOM BOOM Club.

My engine was blown back in 2007, 3 out of the 4 rods thru the block. I was fortunate to get an insurance settlement (long story) to cover the cost of rebuilding. Replaced with a brand new forged block and internals from StreetUnit.com. The whole thing took 14 months to finally get my Ride back on the Road. The majority of the time was fighting with the local Performance Shop and insurance company. At the time I was crushed but now its just a mere memory. Time heals all wounds.

I got 3,500 miles on the forged engine and now looking to move forward with upgrading the performance later this summer. My timing might not be right with your current build but I'll be replacing alot of components to accommodate by next build.

Best of Luck with the Rebuild and Rising from the Ashes.
Looking forward to the pics and hearing more about your plans.

ProjectMSP · Postby **ProjectMSP** » Fri Feb 19, 2010 9:14

ya, the only plan right now is getting it running again lol. I just got home and got the parts except im still waiting on a couple things from http://www.protegegarage.com, and after i get those its smooth sailing. Got as much swapped over as i could today, still at a stand still until the other items get here, I have the clutch kit, water pump, timing belt, gasket set, just waiting on the main bearing support plate and wastegate actuator. Will just be happy to be back on the road. i dont think i have any plans for this car after that terrible experience, on stock boost, going blammy. probably just keep for a daily driver and get a speed 6 or 3 lol.

http://img251.imageshack.us/i/ohimissedit.jpg/

http://img694.imageshack.us/i/blownbits.jpg/

http://img535.imageshack.us/i/enginet.jpg/

http://img519.imageshack.us/i/lookinggood.jpg/

http://img69.imageshack.us/i/newengine.jpg/

http://img38.imageshack.us/i/newengine626.jpg/

http://img175.imageshack.us/i/newhead.jpg/

Sorry for the links cant figure out thumbnails, im a noob.

Anyway here are pics starting to get what i can swapped, without the bearing plate not much i can do, monday ill be pulling the motor, and hopefully my parts will be here. so far i have the coolant lines swapped and am debating on using the 626 single runner intake manifold just not quit sure how to make that work yet. but ya progress finally

Zoom Zoom Boom (MSP)

Zoom Zoom Boom (MSP)

Who is online