Killer's slow and steady build to AWESOMENESS!

KILLER_VIZ · Postby **KILLER_VIZ** » Tue Jun 26, 2012 9:14

erod550 wrote:I had rubbing issues too when I had an HKS mounted just like you have yours. It was minor though and the worst that would happen is it rubs a small hole in the line connecting to that nipple and if so you can replace it with another piece of hose for very cheap.

Just keep an eye on it, because a hole in that line will cause a lean condition at idle when the valve is open. After I switched to a Synapse valve, I had a T in the line that I was using as a reducer with part of it capped and the cap popped off creating a vacuum leak in that line and I was getting CELs and 17-19 AFRs at idle.

I think the genpus have more clearance, but I also put a decent angle on it. It was funny cause I was closing the hood all slow and peeking in there to see.lol

KILLER_VIZ · Postby **KILLER_VIZ** » Tue Jun 26, 2012 9:14

kingtut wrote:Lookin' good Viz!

Tell me more about that Ecotech sticker...

I just graduated from there! (Inaugural Class) Great tech school. Search it online man.

KILLER_VIZ · Postby **KILLER_VIZ** » Fri Jun 29, 2012 9:14

Got my Autotech HPFP internals and CP-e Stg2 rear motor mount installed today. No pic really, but this RMM is a beast!

Mortose · Postby **Mortose** » Fri Jun 29, 2012 9:14

fuel pump is easy, the mount is actually kinda a pain. (at least mine was)

erod550 · Postby **erod550** » Fri Jun 29, 2012 9:14

Rear mount is super easy if you undo the the big bracket that attaches to the mount and swing it down. If you don't, then yea it can be a pain getting it in there.

KILLER_VIZ · Postby **KILLER_VIZ** » Sat Jun 30, 2012 9:14

The CP-e RMM replaces the mount and the mounting brace.

http://www.edgeautosport.com/cp-e-stage-2-wishbone-engine-mount-ms3/

KILLER_VIZ · Postby **KILLER_VIZ** » Thu Sep 13, 2012 9:14

Well Eric and I put in a Whiteline Front strut tower brace last night, and Im loving the new feel thanks @450whp!

Mortose · Postby **Mortose** » Thu Sep 13, 2012 9:14

yesterday i was........ oh wait, wrong thread.

sounds like i'm in the works for one of those, after everyone keeps telling me how awesome they are.

A&PwitMS6 · Postby **A&PwitMS6** » Thu Sep 13, 2012 9:14

for the rims... how many coats and how did you get it lookin gloss? looks SEXY btw

KILLER_VIZ · Postby **KILLER_VIZ** » Fri Sep 14, 2012 9:14

A&PwitMS6 wrote:for the rims... how many coats and how did you get it lookin gloss? looks SEXY btw

I had them powder coated flatblack w/ 20% gloss. +COLORADO POWDER COATING in Commerce City. $75 a rim.

I`m Batman · Postby **I`m Batman** » Fri Sep 14, 2012 9:14

Your speed is looking pretty sweet. So, what's next on the list?

KILLER_VIZ · Postby **KILLER_VIZ** » Fri Sep 14, 2012 9:14

I`m Batman wrote:Your speed is looking pretty sweet. So, what's next on the list?

Thanks!

I will be getting the side mounts next.
http://www.edgeautosport.com/jbr-side-motor-mount-package/
I should have this EFR kit by Christmas time!
http://www.full-race.com/store/turbo-kits/mazdaspeed-3-efr-turbo-kit-2-3-disi-mzr.html
(yes its pricey, but it comes a new FMIC, MANI, DP, and Intake. Their warranty is second to none also, lifetime on most!)

Operator · Postby **Operator** » Fri Feb 15, 2013 9:14

KILLER_VIZ wrote:Thanks!

I should have this EFR kit by Christmas time!
http://www.full-race.com/store/turbo-kits/mazdaspeed-3-efr-turbo-kit-2-3-disi-mzr.html
(yes its pricey, but it comes a new FMIC, MANI, DP, and Intake. Their warranty is second to none also, lifetime on most!)

KILLER_VIZ wrote:EFR kit and a bunch of other stuff.

Some people have been waiting 6-8 months for an 6758. There may be others that have waited longer. I've called all around, and have yet to find anyone with one in stock. Have you gotten an ETA?

KILLER_VIZ · Postby **KILLER_VIZ** » Sat Feb 16, 2013 9:14

Operator wrote:Some people have been waiting 6-8 months for an 6758. There may be others that have waited longer. I've called all around, and have yet to find anyone with one in stock. Have you gotten an ETA?

They have plenty in stock from what they told JP and I. Its going to take about 4 weeks because of the coating option.

Good news got the CP-e 75 duro side mounts in yesterday!

Number2 · Postby **Number2** » Tue Feb 19, 2013 9:14

KILLER_VIZ wrote:I had them powder coated flatblack w/ 20% gloss. +COLORADO POWDER COATING in Commerce City. $75 a rim.

Hey Killer,

Can you tell me if Colorado Powder Coating charges any additional fee for blasting the wheels before the powdercoat?

Killer's slow and steady build to AWESOMENESS!

Who is online