Mazda3 and Mazdaspeed3 parts

clover · Postby **clover** » Fri Mar 09, 2012 9:14

I sold my mazdaspeed3 and am now cleaning out the garage.

CPE Nano short ram intake w/ filter $150 Great sound, easy install, great performance gain for the money. ~5k miles

Corksports TMIC. The only intercooler that I know of that you can still use the stock shroud that directs air to it and keeps it looking clean. Keeps engine and boost temps in line and a great performance mod for the money. $300

Enkei Black RPF1 w/ 245 17' Hankook Ventus Evo V12 w/ only ~6000 miles on them. Still tons of tread ~75%. Great tire that came in 2nd in C&D's performance tire test. Wheels are super light 15.6 lbs spin pressure cast whees that are great for the street and track. I saved about 10lbs per corner from the stock Mazdaspeed 3 wheels which was huge!. Wheels are in perfect shape with no damage at all. Like new. $1100 Will fit mazda3 as well as mazdaspeed 3 with a minor fender roll or the tolerance for a slight rub. These will fit many other cars as well but you will need to check for yourself. 120X5 bolt pattern with a pretty high offset.

Hypertech Flash Tuner for the Mazdaspeed3. Easy, safe, fast tune for lightly modded cars. Always ran like a champ for me and made a giant improvement. HoursePower TV did an episode with an this tune and showed a 71 hp gain on parts of the power curve up top. With the intake intercooler and tune the Mazdaspeed runs realty strong.

Dashawlk universal OBD2 digital gauge display. This can monitor tons of parameters. I set up screens that would show boost pressure, fuel pressure, knock retard, and Air fuel ratio. Also shows fuel trims, instant miles per gallon, can be used as a shift light and tons more. Also can read and clear codes and check engine lights. Everyone with a modified car should have one of these in my opinion. Perfect condition with original packaging and cd for updates. $180

Mazdaspeed3 stock front and rear sway bars. Great upgrade for a mazda 3. I will let them go cheap for $100

All those together made the Speed3 a lot of fun. and I am willing to do a deal to get them all sold fast. Let me know of any questions or picture requests and I will get right back to you. Thanks for looking.

Poet-Tek · Postby **Poet-Tek** » Sat Mar 10, 2012 9:14

I want the TMIC. I sent you an email via Craigslist.

AuroraAxela · Postby **AuroraAxela** » Sat Mar 10, 2012 9:14

I totally call dibs on the sway bars !!!! Call or text me 720-233-5913

Website · Postby **Shadowden** » Sat Mar 10, 2012 9:14

AuroraAxela wrote:I totally call dibs on the sway bars !!!! Call or text me 720-233-5913

Good call!

zachmanj2010 · Postby **zachmanj2010** » Sun Mar 11, 2012 9:14

Im interested in the hypertech if you still have it. Text me at 3035184471

movovr · Postby **movovr** » Mon Mar 12, 2012 9:14

Emailed you

clover · Postby **clover** » Mon Mar 12, 2012 9:14

All except the wheels tires and hypertech have sold. I have one person with dibs on the hypertech but it looks like it may fall through so you are next up if it does. I will let you know. Thank you everyone for the interest.

Website · Postby **Shadowden** » Tue Mar 13, 2012 9:14

Are you sure of your hub spacing on the wheels? I though mazdas were all 5x114.3.

clover · Postby **clover** » Tue Mar 13, 2012 9:14

You are right, I got that mixed up with my new wheels. They are 5 x 114.3 with a 45 offset. 245/45/17 tires. They fit my gen 1 speed three with a stock suspension and a minor rolling of the fenders.

kingtut · Postby **kingtut** » Wed Mar 14, 2012 9:14

Pics and impressions of 135i?

erod550 · Postby **erod550** » Wed Mar 14, 2012 9:14

The owner of the rental house next door came by the other day and they were driving a 135i. They are sharp looking cars and quick too.

Mazda3 and Mazdaspeed3 parts

Mazda3 and Mazdaspeed3 parts

Who is online