92 Miata "build" thread

General Car Related Discussion
Post Reply
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

92 Miata "build" thread

Postby 94mx5 » Sat Mar 19, 2011 9:14

This won't be so much of a build thread, as a re-build thread. I don't think there will be many mods made to the car, just repairs for the most part.

So on Thursday I picked up a 92 Miata. 130,000 miles. Only 2 adult owners. It was fully loaded with all the options from the factory in 92 including power windows, cruise, power antenna. Even has a factory hardtop that it came with from the factory. The ONLY aftermarket equipment is a full Aerodyne turbo setup with a intercooler and full gauges along with Borla exhaust. This was apparently installed in the mid 90's.

The big question is, what does it need, right? Well, it threw a rod and put it through the oil pan. I have a 92 engine in my garage that was waiting for a project, so it looks like I have my work cut out for me! Will also see a new clutch and likely an aluminum flywheel. Otherwise, it will remain a total sleeper. ;)

Pics to follow of the entire ordeal!
Top
User avatar
erod550
Posts: 3764
Joined: Wed Sep 23, 2009 9:14
Location: Colorado Springs

Postby erod550 » Sat Mar 19, 2011 9:14

Buying more cars? Weren't you trying to get rid of 2-seater cars? lol
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors

Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Sat Mar 19, 2011 9:14

Yeah, yeah... I figured someone would give me a hard time. ;)

It was a sweet deal on a cool car that I just couldn't pass up. A turbo'd hard-top car will be a blast. With minimal mods it will be a cool sleeper. Will see what it does. Might need an LSD to get the power to the ground.
Top
User avatar
erod550
Posts: 3764
Joined: Wed Sep 23, 2009 9:14
Location: Colorado Springs

Postby erod550 » Sat Mar 19, 2011 9:14

It will definitely be a fun car. How much did you pay for it with a blown motor?
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way

1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors



Former Rides:

2011 Kona Blue Mustang GT 5.0

2009 True Red Mazdaspeed3 GT

2005 Flame Red SRT-4
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Sat Mar 19, 2011 9:14

Cheap... It was also part of a divorce sale and parked on the street where the city said move it. Cash talks as does a truck/trailer to take it home.
Top
User avatar
ecam8000
Posts: 478
Joined: Mon Jan 10, 2011 9:14
Location: Littleton, CO

Postby ecam8000 » Sun Mar 20, 2011 9:14

Some times, those are the best deals. Sounds like a good grab.
Eric
99 Miata, 45 STR SCCA goto: http://www.rmsolo.org/

2 Fords 29 & 2000.

99 BMW 328i

THANKS! To all who serve.
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Mon Mar 21, 2011 9:14

So I snapped a bunch of pics this evening. Also started tearing into the engine. So far removed the radiator, air cleaner, coil, CAS, intake manifold, intake tubes, radiator hoses, alternator, PS pump, belts. Also got most of the turbo removed, but there are some bolts that I can't figure out how to get off. Will look at it later in the week.
Attachments
IMG_6848.JPG
IMG_6847.JPG
IMG_6846.JPG
IMG_6843.JPG
IMG_6842.JPG
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Mon Mar 21, 2011 9:14

More pics.
Attachments
IMG_6852.JPG
IMG_6851.JPG
IMG_6850.JPG
IMG_6849.JPG
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Mon Mar 21, 2011 9:14

And lastly, the hardest to find hole in the side of the oil pan. It is hidden behind the passenger motor mount.
Attachments
IMG_6855.JPG
IMG_6853.JPG
Top
User avatar
ecam8000
Posts: 478
Joined: Mon Jan 10, 2011 9:14
Location: Littleton, CO

Postby ecam8000 » Mon Mar 21, 2011 9:14

A little JB Weld will fix that. Oh wait, I forgot this wasn't the Chevy forum.
Eric

99 Miata, 45 STR SCCA goto: http://www.rmsolo.org/



2 Fords 29 & 2000.



99 BMW 328i



THANKS! To all who serve.
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Mon Mar 21, 2011 9:14

After getting the turbo completely removed, another problem showed it's face. This might require a little duct tape along with the JB.

Good news is that I got the head removed, and it appears to be in good shape to store for a later project, and I got the engine pulled out. Time to move parts over to the engine that awaits. :)
Attachments
IMG_6875.JPG
IMG_6873.JPG
IMG_6874.JPG
IMG_6872.JPG
Top
User avatar
erod550
Posts: 3764
Joined: Wed Sep 23, 2009 9:14
Location: Colorado Springs

Postby erod550 » Mon Mar 21, 2011 9:14

Head still good? Can you just toss another bottom end in there and be good?
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way

1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors



Former Rides:

2011 Kona Blue Mustang GT 5.0

2009 True Red Mazdaspeed3 GT

2005 Flame Red SRT-4
Top
User avatar
Number2
Posts: 807
Joined: Tue Mar 17, 2009 9:14
Location: Denver

Postby Number2 » Mon Mar 21, 2011 9:14

Good luck with the build. Miatas are awesome cars.
"Littering, and?..."
Image
Top
User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:
Contact RX-7 Chris

Postby RX-7 Chris » Tue Mar 22, 2011 9:14

looks like fun stuff.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog
Top
94mx5
Senior Member
Posts: 257
Joined: Mon Oct 19, 2009 9:14
Location: Denver

Postby 94mx5 » Tue Mar 22, 2011 9:14

erod550 wrote:Head still good? Can you just toss another bottom end in there and be good?


The head appears to be fine, but did contact the piston after the rod broke. I actually already have a spare engine. Will be dropping it in after I go through it all and replace all seals and new clutch. Done the same job before, just never on a turbo car. Adds a bit more complexity.
Top
Post Reply

Return to “Car Chat”

Who is online

Users browsing this forum: Baidu [Spider] and 86 guests