Hey guys I have read some of the info on rear engine mounts ,hear and on the interwebs . Too many choices AAAHHH help ! Which brand is the best and Do I really need the side engine mounts ? I trust you guys. You have so much more expierence than I do . Thanks again Patrick
anybody use Suremotorsports?
rear and side engine mounts Help !
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
I had all 3 Street Unit mounts and they worked great. I had zero wheel hop. But just be prepared once you put the side mounts on you will hear every little noise and rattle and grind and whine your transmission makes. You get used to it after a while but it's pretty annoying at first.
I'd try just the rear mount first and see how much wheel hop you have still. If it's minimal and you're only planning on doing a few bolt-ons, you might be able to get away with just the rear.
I'd try just the rear mount first and see how much wheel hop you have still. If it's minimal and you're only planning on doing a few bolt-ons, you might be able to get away with just the rear.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
Who is online
Users browsing this forum: No registered users and 149 guests