About to get a new speed and am seriously considering a CAI. I am currently in Colorado but may be moving to Pittsburgh where it rains considerably more. Im worried that i will vapor lock the engine driving on wet streets with high humidity year round with the CAI installed. Is this something to be concerned about?
Also, will the dealership void the warrently is you install the ms CAI yourself, i have heard both yes and no but has anyone had any experience with this?
CAI and vaporlock on Speed 3?
-
SpeedRacer
- Posts: 5030
- Joined: Wed Sep 19, 2007 9:14
- Location: Aurora
- Contact:
Burns,
Two things one you can hydrolock your engine with a CAI if you SUBMERGE it in water it is possible. Do not try to forde a river and you will be good
Secondly if you really do want a CAI you can make it a Short ram for when its the rainy season by just taking apart some of the tubing as its a two piece tube.
Vapor lock = filling gas to the top after the pump stops the gas from pumping
Hydro lock = getting water in your engine and it stopping.
Also the dealership has no way to know if you or a dealership installs the CAI really so your fine. I really wouldn't worry about it too much and I could install it for you free if you want.
Two things one you can hydrolock your engine with a CAI if you SUBMERGE it in water it is possible. Do not try to forde a river and you will be good
Secondly if you really do want a CAI you can make it a Short ram for when its the rainy season by just taking apart some of the tubing as its a two piece tube. Vapor lock = filling gas to the top after the pump stops the gas from pumping
Hydro lock = getting water in your engine and it stopping.
Also the dealership has no way to know if you or a dealership installs the CAI really so your fine. I really wouldn't worry about it too much and I could install it for you free if you want.
Heavy duty adjustable dog leashes
http://www.TitanTuff.com
http://www.TitanTuff.com
-
burnsmz
You could also go with a CAI and just add a hydro shield. I think CPE has one available for their intake.
Stay away from the Mazdaspeed/AEM intake as Mazda has pulled it from their shelves due to some problems with it.
I think your best best is CPE CAI or a COBB SRI.
Stay away from the Mazdaspeed/AEM intake as Mazda has pulled it from their shelves due to some problems with it.
I think your best best is CPE CAI or a COBB SRI.
2006 SPEED6 Liquid Platinum Sport w/ Nav
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
-
burnsmz
<div class='quotetop'>QUOTE (Speedracer is on Vacation @ May 28 2008, 11:08 AM) [url=index.php?act=findpost&pid=48705]<{POST_SNAPBACK}>[/url]</div>
Actually vapor lock occurs when the fuel changes state (from a liquid to a gas) while still in the fuel pump system (pump, lines, filter, carburator....) either from excessive heating of the fuel (engine too hot) or due to lower pressure (high altitude) which causes the the fuel system to lose pressure and stall the engine.
Vapor lock = filling gas to the top after the pump stops the gas from pumping[/b]
Actually vapor lock occurs when the fuel changes state (from a liquid to a gas) while still in the fuel pump system (pump, lines, filter, carburator....) either from excessive heating of the fuel (engine too hot) or due to lower pressure (high altitude) which causes the the fuel system to lose pressure and stall the engine.
[SIGPIC][/SIGPIC]
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come
Mazda will void your warranty if you hydrolock the engine and have a CAI. However, if your tranny goes out they can't void your warranty over the CAI unless they can prove that the CAI causes the tranny failure, which would never happen.
The key is to find a dealership that is tolerant of mods, or return your car to stock when you go in for a dealer visit.
The key is to find a dealership that is tolerant of mods, or return your car to stock when you go in for a dealer visit.
2006 SPEED6 Liquid Platinum Sport w/ Nav
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
-
SpeedRacer
- Posts: 5030
- Joined: Wed Sep 19, 2007 9:14
- Location: Aurora
- Contact:
<div class='quotetop'>QUOTE (MazdaTom @ May 28 2008, 01:09 PM) [url=index.php?act=findpost&pid=48741]<{POST_SNAPBACK}>[/url]</div>
Thank you for correcting my aweful mistake. I bow down to you. I went for the more simple explenation.
Actually vapor lock occurs when the fuel changes state (from a liquid to a gas) while still in the fuel pump system (pump, lines, filter, carburator....) either from excessive heating of the fuel (engine too hot) or due to lower pressure (high altitude) which causes the the fuel system to lose pressure and stall the engine.[/b]
Thank you for correcting my aweful mistake. I bow down to you. I went for the more simple explenation.
- mazdaman-G-
- Member
- Posts: 48
- Joined: Tue Jun 10, 2008 9:14
- Location: Parker
- Contact:
-
EvoXGuy
<div class='quotetop'>QUOTE (mazdaman-G- @ Jun 13 2008, 08:56 AM) [url=index.php?act=findpost&pid=51878]<{POST_SNAPBACK}>[/url]</div>
They don't meet the emisions standards for Cali. So they just pulled them all just to be "safe". They don't want to pay for smog tickets because there intake says 50 state smog legal.
Does anyone know why they pulled the MS CAI?[/b]
They don't meet the emisions standards for Cali. So they just pulled them all just to be "safe". They don't want to pay for smog tickets because there intake says 50 state smog legal.
- mazdaman-G-
- Member
- Posts: 48
- Joined: Tue Jun 10, 2008 9:14
- Location: Parker
- Contact:
<div class='quotetop'>QUOTE (EvoXGuy @ Jun 13 2008, 10:24 AM) [url=index.php?act=findpost&pid=51891]<{POST_SNAPBACK}>[/url]</div>
Thanks for the info! -G-
They don't meet the emisions standards for Cali. So they just pulled them all just to be "safe". They don't want to pay for smog tickets because there intake says 50 state smog legal.[/b]
Thanks for the info! -G-
-
coloskydiver
- Senior Member
- Posts: 845
- Joined: Tue Jan 22, 2008 9:14
- Location: Aurora, CO
- Contact:
Are there any of you SPEED3 guys running a CP-E intake? It seems like most of you all have the Cobb. Just wondering.
[SIGPIC][/SIGPIC]
2005 Nissan Nismo Frontier-Supercharged- SOLD
2006 Speed 6- SOLD
2008 Scion Xd- SOLD
1990 Miata- SuperCharged 331 Fuel Injected Small Block Ford V8-SOLD
2008 Ford F250 Super Duty- Current
2014 Factory Five 818S- In Progress
2005 Nissan Nismo Frontier-Supercharged- SOLD
2006 Speed 6- SOLD
2008 Scion Xd- SOLD
1990 Miata- SuperCharged 331 Fuel Injected Small Block Ford V8-SOLD
2008 Ford F250 Super Duty- Current
2014 Factory Five 818S- In Progress
-
SpeedRacer
- Posts: 5030
- Joined: Wed Sep 19, 2007 9:14
- Location: Aurora
- Contact:
Who is online
Users browsing this forum: No registered users and 99 guests


