New Speed3 Owner

General Car Related Discussion
Post Reply
jhelwege
Junior Member
Posts: 8
Joined: Sun Oct 13, 2013 9:14
Location: Englewood, CO

Postby jhelwege » Tue Oct 15, 2013 9:14

Damn! I guess I should have looked a little further into it... I saw good things about the JBR set, and I will be installing the plate, bushings, and knob tomorrow afternoon. I also grabbed my AP this afternoon... The guys at Edge stayed a little bit late and let me swing by after work to grab it... Pretty damn good customer service!
Top
User avatar
Mortose
Senior Member
Posts: 415
Joined: Sun Jan 22, 2012 9:14
Location: Colorado Springs, CO

Postby Mortose » Wed Oct 16, 2013 9:14

I had a JBR plate in conjunction with the TWM, my throw was like 2 inchs. lol. but it was SUPER notchy and didn't really feel good to drive.
Top
User avatar
Tacheny
Member
Posts: 12
Joined: Thu Oct 25, 2012 9:14
Location: Aurora

Postby Tacheny » Wed Oct 16, 2013 9:14

AuroraAxela wrote:I have the same, and it makes me happy.


I bought the Ralco STS, TWM knockoff, and after feeling mine vs @Auroraaxela, they're pretty much the same, mine was half the price of TWM's.

http://thmotorsports.com/ralco_rz/ralco_rz_short_shifter/914950/i-308369.aspx

I put a stiffer reverse spring, damn this is badass.
Image
Top
User avatar
Mortose
Senior Member
Posts: 415
Joined: Sun Jan 22, 2012 9:14
Location: Colorado Springs, CO

Postby Mortose » Wed Oct 16, 2013 9:14

Corksport is currently working on an adjustable STS that is supposed to be fairly priced, so i would wait a little and see what that brings.
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Wed Oct 16, 2013 9:14

Tacheny wrote:I bought the Ralco STS, TWM knockoff, and after feeling mine vs @Auroraaxela, they're pretty much the same, mine was half the price of TWM's.

http://thmotorsports.com/ralco_rz/ralco_rz_short_shifter/914950/i-308369.aspx

I put a stiffer reverse spring, damn this is badass.


I need to get me one of them springs.... I keep procrastinating.
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]

[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
jhelwege
Junior Member
Posts: 8
Joined: Sun Oct 13, 2013 9:14
Location: Englewood, CO

Postby jhelwege » Wed Oct 16, 2013 9:14

That Ralco STS does look like a damn good deal... I got the JBR plate/bushings/knob installed this afternoon, and the difference is night and day! You guys had me a little worried, but I actually really like the feel. The shift between 1st and 2nd, as well as 2nd and 3rd, feels a million times better. I'm now even more excited about getting the tranny oil swapped out.

I also ran a couple logs with the AP... I didn't have the chance to get to WOT in 4th gear, but I got a pretty good log in 3rd. Fuel Pressure held pretty solid between 1660 and 1720... anybody have any thoughts? I feel like I may need to just do the internals swap to be completely safe...
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Wed Oct 16, 2013 9:14

1660-1700 sounds stock. I would get internals if it were mine. (autotech)
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
Mortose
Senior Member
Posts: 415
Joined: Sun Jan 22, 2012 9:14
Location: Colorado Springs, CO

Postby Mortose » Thu Oct 17, 2013 9:14

What AuroraAxela said. it should be 1800+ with internals.
Top
jhelwege
Junior Member
Posts: 8
Joined: Sun Oct 13, 2013 9:14
Location: Englewood, CO

Postby jhelwege » Thu Oct 17, 2013 9:14

Thanks for the help guys... I will be picking up the internals tomorrow, as well as a Cobb RMM... Wallet takes another hit, but I feel like I'm getting pretty close to having my car where I want it to be.
Top
User avatar
Mortose
Senior Member
Posts: 415
Joined: Sun Jan 22, 2012 9:14
Location: Colorado Springs, CO

Postby Mortose » Fri Oct 18, 2013 9:14

jhelwege wrote:Thanks for the help guys... I will be picking up the internals tomorrow, as well as a Cobb RMM... Wallet takes another hit, but I feel like I'm getting pretty close to having my car where I want it to be.


LOL at this statement!!!

Thats exactly what i said when i got my exhaust, then when i got my tune, and now i'm big turbo. It never stops. lol
Top
jhelwege
Junior Member
Posts: 8
Joined: Sun Oct 13, 2013 9:14
Location: Englewood, CO

Postby jhelwege » Fri Oct 18, 2013 9:14

Haha I'm going to have to cut myself off here shortly... either that or meet the wrath of my fiance, and risk her throwing me out of our apartment... then again an upgraded exhaust might actually be worth those consequences... :D
Top
Post Reply

Return to “Car Chat”

Who is online

Users browsing this forum: No registered users and 48 guests