So, I quit smoking in December, and now with Spring coming, I am looking to get my car fully detailed for the first time. My question is this. Does anyone know of a good, reliable detail shop near Aurora that can remove odors well? That above anything is my concern, because, as I said, after six years, my smoking has imbued my car with a certain musk that I no longer care to have.
Thanks guys!
Detail shops?
- AuroraAxela
- Posts: 397
- Joined: Wed Dec 14, 2011 9:14
- Location: Aurora, CO
Detail shops?
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]
[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
Contact Mike B at the Man Cave in Wheatridge: http://www.mancavedetail.com/
He's a member on this board so he'll gives good deals to CMZC members.
He's a member on this board so he'll gives good deals to CMZC members.
I'm with chickenwafer, I had my interior cleaned and exterior detailed at The Man Cave, and Mike really hooked me up and I really loved the job they did. That being said, I had no bad smells to have removed, so I can't comment on their ability to remove smells.
Congrats on kickin the habit!
Congrats on kickin the habit!
[color="Blue"]2008 Subaru Legacy 2.5i PZEV - Current Ride, 100% stock[/color]
[color="Gray"]2005 Mazda 6i Pebble Ash Metallic - Dead[/color]
- MichaelB145
- Posts: 89
- Joined: Mon Sep 24, 2007 9:14
- Location: Littleton
- Contact:
Hi guys! I am very thankful that you guys thought of me for your detailing. I am a Mazda enthusiast first and even though we detail a lot of Ferrari's and Porsches, I will always take care of you guys!
Sorry I am not on the board as much but it doesn't help I totaled my RX-7 and don't have the money to fix it. Hopefully, I will be at one of the meets this summer!
Mike B
Man Cave Detail
303-279-7333
Sorry I am not on the board as much but it doesn't help I totaled my RX-7 and don't have the money to fix it. Hopefully, I will be at one of the meets this summer!
Mike B
Man Cave Detail
303-279-7333
- MtnHighRX-7
- Member
- Posts: 62
- Joined: Mon Apr 20, 2009 9:14
- Location: Denver, Colorado
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
Am I really that oblivious? lol. It was sitting back in the corner of his shop when I had my car detailed, but I couldn't see the whole thing. Just the driver side.
[color="Blue"]2008 Subaru Legacy 2.5i PZEV - Current Ride, 100% stock[/color]
[color="Gray"]2005 Mazda 6i Pebble Ash Metallic - Dead[/color]
- AuroraAxela
- Posts: 397
- Joined: Wed Dec 14, 2011 9:14
- Location: Aurora, CO
Thank you, Mike, I shall call you when I am set to get the detail done. Look forward to seeing your work!
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]
[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
- Hschlick84
- Senior Member
- Posts: 320
- Joined: Fri Dec 31, 2010 9:14
- Location: Northglenn
- MichaelB145
- Posts: 89
- Joined: Mon Sep 24, 2007 9:14
- Location: Littleton
- Contact:
I actually wrecked it at Colorado National Speedway doing the circle drags while they were filming a show with Willie B. I made the dumb mistake of putting on different size wheels in the back without re-adjusting my break proportioning valve. When I came in extremely hot to turn 3, I just locked up and slid into the wall. I probably should have just got back onto the gas and tried to drift that corner but it happened so fast. I have a video of the wreck posted at RX7fire.com.
The FD I have stored at the Man Cave is actually a friend of mines. I probably will end up buying it since he moved to New York and can't drive it there.
As far as prices for detailing at the Man Cave.....
$200 - Wash, single stage polish, Wax, full interior, and engine bay
$300 - Same as above but 3 stage polish if car is really scratched up
I have other packages starting at $125 and can go to over $500 for restorative detailing such as painting calipers, undercarriages, polishing intake manifolds, ect.
Look forward to getting the Mazda community together this Spring.
Mike B
www.mancavedetail.com
303.279.7333
The FD I have stored at the Man Cave is actually a friend of mines. I probably will end up buying it since he moved to New York and can't drive it there.
As far as prices for detailing at the Man Cave.....
$200 - Wash, single stage polish, Wax, full interior, and engine bay
$300 - Same as above but 3 stage polish if car is really scratched up
I have other packages starting at $125 and can go to over $500 for restorative detailing such as painting calipers, undercarriages, polishing intake manifolds, ect.
Look forward to getting the Mazda community together this Spring.
Mike B
www.mancavedetail.com
303.279.7333
Return to “Finishing Touches and Detailing”
Who is online
Users browsing this forum: No registered users and 31 guests