last night i went to taco bell, (the car was all warmed up and at proper operating temp) and when i got back on to Broadway, 1st gear was fine, then i don't know if i missed a gear or what but i thought i was in 2nd gear and i kinda gunned it (to try and cross 4 lanes before i-25) and it just revved and redlined but didn't move, then the car stunk, BAD, i was only a few blocks from home so i drove it the rest of the way and it drove fine, but the smell awful,
I looked at the engine last night and didn't see anything, but the weird smell was so bad i could barely tolerate being that close to it for too long...
This morning i open the hood and didn't really see anything, no stains underneath either and i started the engine and test-drove it, the smell is barely there, but still there, my garage still stinks too...
did i break something? what should i look at? what should i look for?
it's an 07/MS3/49k
thank ya kindly govna's
i dun' broked it?
i dun' broked it?
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
sounds like the clutch to me.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
RX-7 Chris wrote:sounds like the clutch to me.
That's what I thought a first but the smell is coming from the engine, and the car is shifting fine today... I really think my dumbass shifted from 1st to 4th
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
kingtut wrote:What did you get?
I concur on the clutch smell (looks at Chris).
The car drives fine otherwise, eh? No signs of 'slippage' whilst driving?
Cheesey gordita crunch baby! My fav, + a chickEn flatbread sandwich...
No slippage at all today and ive been testing it a lot both city/highway
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
being a FWD, the tranny is right next to the engine under the hood. so the smell would be coming from under the hood.
You may have just overheated the clutch and not completely destroyed it. Usually you will feel the clutch slit when the car is pushed hard. You probably killed some of the life of the clutch but not killed it completely.
You may have just overheated the clutch and not completely destroyed it. Usually you will feel the clutch slit when the car is pushed hard. You probably killed some of the life of the clutch but not killed it completely.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
kingtut wrote:mmm. (liquidz)
lol eeeeeew
RX-7 Chris wrote:You probably killed some of the life of the clutch but not killed it completely.
trade-in time?
cluth didn't grind or anything but maybe that's it... i was worried maybe turbo-seal or something, tail pipe isn't smoking either
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
I did that to my friend's 2011 STi when I tried my first AWD launch, lol. Note: You can't just rev to 6k and dump it.
As long as it's driving fine now I wouldn't worry too much about it. Clutches wear out and can be replaced. I definitely don't think it's anything to trade in the car over.
As long as it's driving fine now I wouldn't worry too much about it. Clutches wear out and can be replaced. I definitely don't think it's anything to trade in the car over.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
RichB wrote:Yup, you burned the clutch. Its inevitable to make that mistake at some point. The stock clutch is pretty good on the MS3 so as long as you don't do it too many more times, you won't notice a difference in performance.
ditto. Forgot to mention that part... but as stated above, you will be fine and never notice a difference if this was a one time deal.
cool thanks guys, definitely sounds like what it is... especially the burn-brakes-smell part, fing nasty!!! i hate that smell. trying to let it air-out as much as i can now 

<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
Who is online
Users browsing this forum: Baidu [Spider], Bing [Bot] and 59 guests

