Daylight Savings?

tbot

Postby tbot » Sun Mar 09, 2008 9:14

So i was just curious if anyone was going to change the time on the site now that daylight savings kicked in...

Huzer21

Postby Huzer21 » Sun Mar 09, 2008 9:14

Maybe you'll have to change the settings for your profile. The times I see on the site are correct. Just verify you're using the correct time zone in your profile.

You can check this by going to "My Control Panel", Down on the left, under options , there's "board settings". At the top, it lists the time zone, and there's a checkbox to automatically adjust to DST.

tbot

Postby tbot » Sun Mar 09, 2008 9:14

weird...i had all the settings correct...but for like 30 minutes it didn't update...now everything is fine...

User avatar
GR-8
Posts: 5335
Joined: Thu Oct 11, 2007 9:14
Location: Denver/ Lakewood
Contact:

Postby GR-8 » Sun Mar 09, 2008 9:14

Quick fix for this is to log out and log back in if all your settings are correct and time is still wrong.
Image

ImageImage

User avatar
GR-8
Posts: 5335
Joined: Thu Oct 11, 2007 9:14
Location: Denver/ Lakewood
Contact:

Postby GR-8 » Tue Mar 11, 2008 9:14

<div class='quotetop'>QUOTE (Greek8 @ Mar 9 2008, 05:09 PM) [url=index.php?act=findpost&pid=31048]<{POST_SNAPBACK}>[/url]</div>
Quick fix for this is to log out and log back in if all your settings are correct and time is still wrong.[/b]

I have an Update on my quick fix. As I just found out it is a temporary fix. If most of you are like me and have CMZC set as a home page the real fix should be to make sure your settings are correct as Huzer (Tim) pointed out in the second post. When that is done log out and log back in. Your time will be correct. Now the next step to permanantly fix this is to reset the Club page as your home page. This will reset the refreshed settings.
Image


ImageImage

MazdaTom
Posts: 2191
Joined: Fri Sep 21, 2007 9:14
Location: Highlands Ranch
Contact:

Postby MazdaTom » Wed Mar 12, 2008 9:14

My settings flip-flop back and forth. Right now it says it's 6:47 am, but it's actually 7:47. Yesterday they were right for awhile, then I got logged out (happens alot at work) and when I logged back in, they were wrong again.
[SIGPIC][/SIGPIC]
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come

User avatar
GR-8
Posts: 5335
Joined: Thu Oct 11, 2007 9:14
Location: Denver/ Lakewood
Contact:

Postby GR-8 » Thu Mar 13, 2008 9:14

I take my fixes back now. For good. I too have this flip flopping problem Tom speaks of.
Image


ImageImage

LM

Postby LM » Thu Mar 13, 2008 9:14

FYI - we are looking into this... B)

MazdaTom
Posts: 2191
Joined: Fri Sep 21, 2007 9:14
Location: Highlands Ranch
Contact:

Postby MazdaTom » Thu Mar 13, 2008 9:14

I turned off my "automatically detect DST" option and then manually selected "DST is in effect" option. Haven't noticed anything out of whack since then.
[SIGPIC][/SIGPIC]

1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4

mods- 30" BFGs, AAL + TT = 1.5" lift, more to come

LM

Postby LM » Thu Mar 13, 2008 9:14

hummmm....that's good to know. Thnx Tom.

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Thu Mar 13, 2008 9:14

i tried tom's fix and all is well...for me...in regards to the TZ issue on the boards...
"20<cut off="">"</cut>

LM

Postby LM » Thu Mar 13, 2008 9:14

InvisionPower just uploaded a patch to fix this issue. Try using your previous settings and let me know if it is working ok.

MazdaTom
Posts: 2191
Joined: Fri Sep 21, 2007 9:14
Location: Highlands Ranch
Contact:

Postby MazdaTom » Thu Mar 13, 2008 9:14

Nope. Bumped it back an hour.
[SIGPIC][/SIGPIC]

1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4

mods- 30" BFGs, AAL + TT = 1.5" lift, more to come

LM

Postby LM » Thu Mar 13, 2008 9:14

Thanks Tom. Still trouble shooting...

MazdaTom
Posts: 2191
Joined: Fri Sep 21, 2007 9:14
Location: Highlands Ranch
Contact:

Postby MazdaTom » Thu Mar 13, 2008 9:14

I wouldn't worry too much about it.
[SIGPIC][/SIGPIC]

1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4

mods- 30" BFGs, AAL + TT = 1.5" lift, more to come


Return to “Colorado Automotive Enthusiasts News and Info”

Who is online

Users browsing this forum: No registered users and 55 guests