I have a lot of stuff, some of it needs to be someone elses stuff. The following could be YOUR stuff!
RX-7 FD Transmission, good condition, $150
1.6 Miata rear diff, good condition, $75
1.6 Miata 5-spd trans, good condition, $150
1.6 miata halfshafts, just rebuilt and perfect! $80 each
full set Bilstien shocks for 90-up Miata, decent condition $50 for the set
Full set of Bilstien shocks for 2006-up MX-5, nearly new, offers
Full set of OEM Tokicos for 2006-up MX-5, offers
OEM HVAC controls/radio for 2006-up MX-5 Offers
2 Leather steering wheels for 2006-up MX-5 with stereo controls, make offer!
FD RX7 Turbos, need rebuilt but NO CRACKS! $75
FD RX7 Turbo center section, NO CRACKS $50
FD RX7 Turbos, in good condition $125
RX-8 carbon driveshaft
RX-8 rear subframe
RX-8 fuel tank
Various rotors, housings, e-shafts,intake manifolds, fuel rails, oil pans, etc. for all types of 13B engines, from S4 to Renny. Ask and I might be willing to let go of whatever you need.
Boxes of misc FD and FC parts, including coils, intake manifolds, etc. that need to go away, ask and if I have it theres a good chance it will go away!
As always, best way to reach me is text at 720-212-5838
Cleaning out the shop sale!
Cleaning out the shop sale!
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
how about a s6 diff, an oil pump, and maybe a e-shaft?
2003 MazdaSpeed Potege: Wiseco Pistons, Molnar Rods, Walboro 255, Megasquirt Ecu, Front Mount, Daily Driver.
1991 Mazda Rx-7 Convertible: Rebuilt 4-Port Turbo Block, TII drivetrain swap, Walboro 255, Megasquirt, Aeromotive FPR, JIC coilovers, 4" Stainless exhaust, Ticket Getter.
1976 Honda CB750F: Cafe Racer, Powder coated, Rebuilt, re-bearing/bushing, tapered stem bearing upgrade, Garage Project
2014 Silverado: Mazda Support Vehicle
2003 Subaru Forester: What was I thinking?...
1991 Mazda Rx-7 Convertible: Rebuilt 4-Port Turbo Block, TII drivetrain swap, Walboro 255, Megasquirt, Aeromotive FPR, JIC coilovers, 4" Stainless exhaust, Ticket Getter.
1976 Honda CB750F: Cafe Racer, Powder coated, Rebuilt, re-bearing/bushing, tapered stem bearing upgrade, Garage Project
2014 Silverado: Mazda Support Vehicle
2003 Subaru Forester: What was I thinking?...
I have oil pumps and several e-shafts, no problem there. No FD diffs, sorry!
Also, I happen to have a 73 GT550 Suzuki three cylinder two-stroke cafe racer and have had a few CB750's and 550's, love cafe bikes!
Also, I happen to have a 73 GT550 Suzuki three cylinder two-stroke cafe racer and have had a few CB750's and 550's, love cafe bikes!
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
Sweet, I'm a big fan of cafe bikes... and I can only imagine how much fun a 550cc two stroke is! Maybe when I get mine wrapped up and derivable we could meet up.
I might be interested in the oil pump and an eshaft. I'll let you know when I know for sure.
I might be interested in the oil pump and an eshaft. I'll let you know when I know for sure.
2003 MazdaSpeed Potege: Wiseco Pistons, Molnar Rods, Walboro 255, Megasquirt Ecu, Front Mount, Daily Driver.
1991 Mazda Rx-7 Convertible: Rebuilt 4-Port Turbo Block, TII drivetrain swap, Walboro 255, Megasquirt, Aeromotive FPR, JIC coilovers, 4" Stainless exhaust, Ticket Getter.
1976 Honda CB750F: Cafe Racer, Powder coated, Rebuilt, re-bearing/bushing, tapered stem bearing upgrade, Garage Project
2014 Silverado: Mazda Support Vehicle
2003 Subaru Forester: What was I thinking?...
1991 Mazda Rx-7 Convertible: Rebuilt 4-Port Turbo Block, TII drivetrain swap, Walboro 255, Megasquirt, Aeromotive FPR, JIC coilovers, 4" Stainless exhaust, Ticket Getter.
1976 Honda CB750F: Cafe Racer, Powder coated, Rebuilt, re-bearing/bushing, tapered stem bearing upgrade, Garage Project
2014 Silverado: Mazda Support Vehicle
2003 Subaru Forester: What was I thinking?...
- millertime
- Senior Member
- Posts: 137
- Joined: Mon Sep 09, 2013 9:14
- Location: Denver Metro
No 1.8 diffs, sorry.
Let me know on the Bilsteins!
If I had any oil lines for an FD I got rid of them long ago. I generally build oil cooler kits for the FD/RX8, so have never kept the old stock ones lying around., sorry.
Let me know on the Bilsteins!
If I had any oil lines for an FD I got rid of them long ago. I generally build oil cooler kits for the FD/RX8, so have never kept the old stock ones lying around., sorry.
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
Who is online
Users browsing this forum: No registered users and 4 guests