Putting this up for sale to CMZC members first, then everywhere else.
I'm selling my AEM 52mm electronic boost gauge. Gauge is in 100% functioning shape and works as advertised. Reads up to 35psi and 30 inHG of vacuum. The sensor also self-calibrates to our altitude.
Backlighting changes to 7 different colors (currently set to red) including red, green, blue, purple, orange, white, and aqua. Gauge also utilizes a 0-5v analog output to connect to any linear 0-5v input on a datalogger or EMS, for example.
One issue with the gauge, which is clear in the following pictures, is there is a small piece broken off the back. When installed in a pod, gauge cup, or something similar, this is in no way visible. It does not effect the electrical connectors at all, either. I stupidly broke this when attempting to remove one of the mounting studs off the rear, had the stud half way cut and got impatient and grabbed it my pliers assuming the weakened stud would snap off. Wrong, the plastic it was molded into broke!
Once again, this is NO WAY effects the operation or look (installed) of the gauge!
This includes everything- obviously the gauge, power harness (has been shortened and wrapped in electrical tape, but is still roughly 3ft long) sensor haress (uncut and 100% in-tact), boost sensor, and even the original box with instructions, butt crimps and AEM sticker!
MSRP Retail is $175, I am letting this go to CMZC members for $100 bucks. I am willing to meet anyone within reasonable distance as well!
Pictures:
Broken back panel:
You can see the electrical connectors are 100% in-tact and fine:
Everything included as if you bought it new!
Thanks!
-Dave
AEM 52mm Electronic Boost gauge
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
That is a big time low ball offer.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
-
- Member
- Posts: 62
- Joined: Tue Feb 22, 2011 9:14
- Location: Colorado Springs
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
I agree with Chris. My first post was basically calling him a dick for joining simply to give a shitty low ball offer to Dave. $50 shipped when he is asking $65 for local pickup for real cmzc member is just rude. Then I decided to change it.
Why would you need a boost gauge for your Subaru, Mike?
Why would you need a boost gauge for your Subaru, Mike?
[color="Blue"]2008 Subaru Legacy 2.5i PZEV - Current Ride, 100% stock[/color]
[color="Gray"]2005 Mazda 6i Pebble Ash Metallic - Dead[/color]
Subarus have turbos too, and don't come with boost gauges stock.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
erod550 wrote:Subarus have turbos too, and don't come with boost gauges stock.
I know I just wanted to take the opportunity to give him crap because his car looks like a Subaru lol.
[color="Blue"]2008 Subaru Legacy 2.5i PZEV - Current Ride, 100% stock[/color]
[color="Gray"]2005 Mazda 6i Pebble Ash Metallic - Dead[/color]
Who is online
Users browsing this forum: Bing [Bot] and 44 guests