FS: Full MS6 Part Out (Formerly fully bolted)

A&PwitMS6 · Postby **A&PwitMS6** » Sun Oct 21, 2012 9:14

Regulator wrote:AP has been sold and Synapse BOV is pending payment.

If the "pending payment" is mine, something came up and its not in the cards at the moment... Sorry

Regulator · Postby **Regulator** » Sun Oct 21, 2012 9:14

Synapse BOV has been sold. Price has been reduced on the wheels, TMIC, and DP.

COspeed6 · Postby **COspeed6** » Sun Oct 21, 2012 9:14

Thanks for the BOV and FMIC! What type of silicone did you use to seal the BOV?

Regulator · Postby **Regulator** » Sun Oct 21, 2012 9:14

COspeed6 wrote:Thanks for the BOV and FMIC! What type of silicone did you use to seal the BOV?

@COspeed6

I don't recall the name, but I just went to the auto parts store and found some high heat silicone sealant and I never had a prob. I'd go with the highest temp resistance you can find though because of the bov positioning, just to be safe.

erod550 · Postby **erod550** » Sun Oct 21, 2012 9:14

COspeed6 wrote:Thanks for the BOV and FMIC! What type of silicone did you use to seal the BOV?

I had that BPV on my MS3 and didn't use any silicone or other sealer. It has a little rubber ring around the hole where it connects to the cold pipe that should be sufficient when tightened down. I didn't have any issues with leaks.

Regulator · Postby **Regulator** » Mon Oct 22, 2012 9:14

Downpipe has been sold.

Regulator · Postby **Regulator** » Tue Oct 23, 2012 9:14

Alright only a few parts left here! No reasonable offer will be refused! PM me!

deni · Postby **deni** » Wed Oct 24, 2012 9:14

Don't have full access to PM yet, but would like to contact you about the rims

Regulator · Postby **Regulator** » Wed Oct 24, 2012 9:14

Wheels are pending.

Regulator · Postby **Regulator** » Wed Oct 24, 2012 9:14

Remaining prices for parts have been slashed to my bare minimum. Won't be worth it to send them for any less.

Edit: Wheels have been sold.

dannythall · Postby **dannythall** » Thu Oct 25, 2012 9:14

Hey I'm interested in the tmic. Can't PM yet, message me if still available.

Regulator · Postby **Regulator** » Fri Oct 26, 2012 9:14

TMIC has been sold.

Fordguy2_MS6 · Postby **Fordguy2_MS6** » Sun Oct 28, 2012 9:14

Hello, although I've been around awhile on other boards, it seems I am unable to PM here yet. I would like to buy the CP-E CAI. Being as I seem to be the only MS6 owner without some sort of aftermarket intake, I would really like to get this. Please let me know how else you can be contacted.

Thanks

Regulator · Postby **Regulator** » Sat Nov 17, 2012 9:14

Final post!!

I have sold all parts besides the CP-e Turbo Inlet which is worth $210: http://cp-e.com/products/mazdaspeed3-gen1/mzr-23-disi-nviscid%E2%84%A2-pipe

I have it listed for $100 right now, but if you make me an offer that makes it worth my while its yours!

Thanks for looking!

FS: Full MS6 Part Out (Formerly fully bolted)

Who is online