yay for ap pro tune
yay for ap pro tune
So I went to revolutions and got a 91 octane pro tune and pretty decent results on stock turbo I have full bolt ons except a water meth and a turbo my baseline run with the stage 2 93 plus sf tune on the "heartbreaker" dyno was 228 whp 253 tq the final fun with the tune is 256 whp and a whopping 315wtq hella noticeable difference so anyone in the springs area want to get their speed tuned I recommend revolutions servion does a good job not bad numbers on the stock k04.
Silver 06 speed6 mods: E85 mix 40/60, Atp highflow catted DP, Cobb Accessport, custom AP pro tune by Servion tuned at 22psi. Corksport FMIC with Ram Air intake, SURE Engine Mount, HKS 2 step colder plugs gaped .28, Forge v2 bpv, Straight piped exhaust 2.5 IN, light weight 17 in black wheels lowered on Tien lowering springs, slotted rotors, hawk pads all around. When I get back from afganistan built block, big turbo, clutch and supporting mods
Nice numbers. I've heard good things about Servion, just always on Hondas. Didn't know he knew the DISI platform too. Good stuff.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
- reconbygod12
- Posts: 393
- Joined: Fri Sep 03, 2010 9:14
- Location: madison wi
Nice! Thanks for the feedback about this place.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
Hey guys thanks for the replys yea he's familiar with disi infntact he says he likes to tune them he can get good numbers when other cars without di get stopped on power way before we do on stock and even slightly modded fuel systems its relatively easy for him to get nice numbers with di fuel systems not to mention dyno dynamics dyno read either really low or really accurate he was telling me I would more than likely pull 300 ish whp and 360ish tq on upp or macs dyno with his tune. Awesome guy though worked late to finish my tune took 20 pulls due to boost tables and 12 timing tables to tweak
Silver 06 speed6 mods: E85 mix 40/60, Atp highflow catted DP, Cobb Accessport, custom AP pro tune by Servion tuned at 22psi. Corksport FMIC with Ram Air intake, SURE Engine Mount, HKS 2 step colder plugs gaped .28, Forge v2 bpv, Straight piped exhaust 2.5 IN, light weight 17 in black wheels lowered on Tien lowering springs, slotted rotors, hawk pads all around. When I get back from afganistan built block, big turbo, clutch and supporting mods
Return to “Engine and Drivetrain”
Who is online
Users browsing this forum: No registered users and 10 guests