Long story, but had an internal error when trying to post...
Check it out here:
http://forum.mazda6club.com/index.php?showtopic=120120
My First Carnage with the Speed!!!
My First Carnage with the Speed!!!
[SIGPIC][/SIGPIC]
Yep, I've heard lots of MS6 people talking about problems with the rear diff mounts. It's usually one of the first things they upgrade.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
tbot wrote:I have too, but this wasn't the mount, it was the bolts to the mount that broke. I think even if I had upgraded that mount I would be in the same situation cause it was the bolts. Ah well, it'll be looked at tomorrow, and hopefully fixed!
Ah ok. I hadn't looked into specifics because I don't have a rear diff. :P
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
I shredded my rear diff mount bolts last summer...was covered under warranty!
GT28-COBB AP-COBB SRI-TURBOSMART EBOOST2 EBC-JBR SSP-CP-E DP-CP-E INLET-CP-E 3'' CB-ETS IC-DNP MANI-TIAL 44MM EWG-OEM BPV-AWR RRM-SURE DREADNAUGHT-EIBACH SL SPRINGS-KONIG ZERO'S-GREDDY OCC-NGK 1 STEP COLDER PLUGS
[SIGPIC][/SIGPIC]
[SIGPIC][/SIGPIC]
I'll have to check and see if they used the upgraded bolts on my rear diff mount when they replaced it. I'm hoping they did....
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
At least the bolts should be cheap, assuming nothing else broke due to the bolts popping out.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
Rich wrote:Exact same thing happened to me. The dealer had no problem repairing it under warranty. Mazda has made stronger replacement bolts specifically to address this issue.
Well thats good to know!!! I had even told the service writer at the dealer about this and they just gave me a blank look haha, so hopefully the techs know more about it. Still waiting to hear back from them, dropped it off at 7 this morning.
[SIGPIC][/SIGPIC]
tbot wrote:Well thats good to know!!! I had even told the service writer at the dealer about this and they just gave me a blank look haha, so hopefully the techs know more about it. Still waiting to hear back from them, dropped it off at 7 this morning.
If they don't help you, bring it down to Bob Penkhus Mazda in the Springs. You'd have to have it towed, but they'd fix you up. Still in warranty?
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
Return to “Engine and Drivetrain”
Who is online
Users browsing this forum: No registered users and 24 guests