need help speed 6 atp dp install

04rx8 · Postby **04rx8** » Thu Mar 03, 2011 9:14

Hey guys trying to get the stock dp off need some tips to get the 5 bolts off the dp that connects to the turbo and getting it out.

Eclipse · Postby **Eclipse** » Thu Mar 03, 2011 9:14

take the alternator off with the three bolts holding it in place, and let it hang down, makes life much easier

erod550 · Postby **erod550** » Thu Mar 03, 2011 9:14

Yea I've heard the alternator makes life hell getting the DP off on the MS6. With my MS3 I just used a lot of extensions and u-joints so I didn't have to try to get the ratchet down in there. Also, liberal use of PB Blaster helps, especially because your MS6 probably has a lot more miles than my MS3 had on it when I did my downpipe.

movovr · Postby **movovr** » Thu Mar 03, 2011 9:14

OCD wrote:take the alternator off with the three bolts holding it in place, and let it hang down, makes life much easier

Listen to this man ^

rmeeker13 · Postby **rmeeker13** » Thu Mar 03, 2011 9:14

+1 on the alternator removal, also use plenty of penatrating lube on all nuts/studs and o2 sensors, if they've been in there awhile which I assume they have they end up welding themselves in their. If you need any advice OCD and I have done it many times!

need help speed 6 atp dp install

need help speed 6 atp dp install

Who is online