• Anyone in the Springs are have experience with Turbo II's?

Posted: **Mon Feb 24, 2014 9:14**

I am having the hardest time figuring out the wiring and vacuum hose routing on this motor. I have searched online and memorized my haynes manual but im still so confused. :confused:

If anyone could come help me i will definitely make it worth your time in beer or money or whatever. I just want to get my t2 running already.

Thank you!

Posted: **Wed Mar 05, 2014 9:14**

im planning on replacing all the vaccum lines after i come back from training end of march

Posted: **Thu Mar 06, 2014 9:14**

You can get the full shop manual here: http://foxed.ca/index.php?page=rx7manual

It's way better than the haynes manual.

I might have time to help you out. I haven't worked much on a TII but they are all basically the same.

Posted: **Sun Apr 27, 2014 9:14**

RX-7 Chris wrote:You can get the full shop manual here: http://foxed.ca/index.php?page=rx7manual

It's way better than the haynes manual.

I might have time to help you out. I haven't worked much on a TII but they are all basically the same.

I have done it following the FSM, though it's a migraine inducing experience reading the diagrams.

Posted: **Thu May 01, 2014 9:14**

any luck with the vacuum hoses? is youre tii having idling issues?