Page 1 of 2

Car sold, parts for sale, twins, intercooler, JDM rear seats too

Posted: Tue Sep 04, 2012 9:14
by Ryan95
Car's gone, dude didn't want the rear seat setup, so it's here for sale.

Black rear seats, nice shape. Seat bottom has a seam split that can probably be fixed pretty easy.

$600 picked up for everything. Seat back and bottom with brackets, rear panels (you need speaker covers, but I have a set for sale) rear hatch plastics, rear seatbelts.
You'll need a couple body clips from your bins, maybe a nut/bolt or two and a couple hours to do the install.

I've never seen a US car with the complete setup, most are missing parts. This is complete.

Image
Image
Image
Image

Front cloth seats. US Drivers side is in very good to like new condition. The seat rails have been modified to slide all the way back like the US cars.
US Passenger seat has some wear and one very minor hole that's hidden near a seam. The vinyl backing on the passenger seat has 2 minor spots at the stitching where it's separating. The passenger side seatbelt strap is also broken at the base. It works fine when it's strapped up.
$300 picked up

Image

Posted: Tue Sep 04, 2012 9:14
by Ryan95
Rehabbed stock turbos $325
These turbos were sold to me by Chickenwafer, I never even picked em up. I paid a lot more than this for em.

This is his ad:
First is a set of *mint* factory twins I converted to non-sequential. I bought these used with a reported 23,000 miles on them and was told they boosted perfectly and did not smoke. Extremely minimal shaft play.

Upon receiving the twins I completely disassembled them, inspected all parts, thoroughly cleaned each and every part, converted to non-sequential, and painted all parts with a special high-temp enamel that cures in an oven in a 3 stage process. The finish is chemical, liquid, and oil resistant and very durable. The results speak for themselves:

Image
Image


Stock FD rad out of a low mileage 94. Didn't leak, not many bent fins. Car ran cool and had very regular coolant flushes.
$100 picked up

Image

Stock intercooler with both hoses (only one pictured)
$40 picked up
Image


Pettit cool charge intercooler. Best description I can give, rough. Lots of bent fins, and a spot where it rubbed on something and split about 1 mm.
I took it to a radiator shop and was quoted $125 to refurbish it and make it like new, that included fixing the leak. If you're willing to do the work, you'll end up with a really nice SMIC really cheap.
$100 picked up
Image
Image

R1/base speaker grills. All the tabs are intact. Perfect shape.
$70 picked up.

Image

OEM turn signal housings. Good shape, maybe hit em with a light plastic polish before you install em. $20


Image

2 dual gauge pods. One's an autometer one's a Proparts. Both are like new, I don't think they were ever used.
$20 a piece.

Image

Upper steering column plastic piece. Only the top half. Good shape.
$20
Image

Posted: Tue Sep 04, 2012 9:14
by VRx8
Those seats look nice! Such a bad timing but oh well GLWS

Posted: Tue Sep 04, 2012 9:14
by tsx_guy
I see you painted your toe nails. nice work!

Posted: Tue Sep 04, 2012 9:14
by Ryan95
VRx8 wrote:Those seats look nice! Such a bad timing but oh well GLWS



Yeah they're in really good shape.
Come by em :D

Posted: Tue Sep 04, 2012 9:14
by chickenwafer
^haha I was going to mention that.

I want those seats. Let me see what I can do if they work out.

I still have those turbos in my garage. They are a GREAT set of non seq twins looking for a good home!

Posted: Tue Sep 04, 2012 9:14
by Rx7boy719
Hey im looking for the middle plastic piece for the rear hatch how much are you selling it for just that piece,mine is broken. I need it ASAP

Edit: Also the 2 plastic pieces that cover the "Koni firm knobs" in the rear hatch also.

Posted: Tue Sep 04, 2012 9:14
by Ryan95
Rx7boy719 wrote:Hey im looking for the middle plastic piece for the rear hatch how much are you selling it for just that piece,mine is broken. I need it ASAP

Edit: Also the 2 plastic pieces that cover the "Koni firm knobs" in the rear hatch also.


Don't have the middle piece, if you're talking about the one that allows you to get to the taillights and spare tire.

I have the plastic covers, but I'm waiting to see if anybody needs the whole plastics.

Posted: Sun Sep 09, 2012 9:14
by Ryan95
Front seats are sold :)

Posted: Mon Sep 17, 2012 9:14
by Ryan95
Alright everybody, buy my crap.

Posted: Mon Sep 17, 2012 9:14
by Rx7boy719
So how about them plastic covers? I just want those two, I will also pick them up from the springs.

Posted: Tue Sep 18, 2012 9:14
by Ryan95
Rx7boy719 wrote:So how about them plastic covers? I just want those two, I will also pick them up from the springs.


Which plastic covers? The one for the seat belts or latches?

Posted: Wed Sep 26, 2012 9:14
by Ryan95
Still have the turbos, stock rad, stock ic and a couple minor things.

Posted: Tue Oct 02, 2012 9:14
by Ryan95
Turbos are sold. Just a couple small parts left. Someone come get this shit.

Posted: Tue Oct 02, 2012 9:14
by speedjunkie
Those two plastics that go around the inside of the hatch, I might be interested in those depending on price and if they're not scratched up. Trying to spruce up my interior.