My Dream Parts List

[RX-7 Chris]

I will have all this done at some point.

Body:
-Extreme Dimensions Duraflex M-1 Speed Complete Body Kit $551.93 http://www.extremedimensions.com/7288.html
-Mariah Mode Four 3-Piece Rear Lip Spoiler $316 http://www.mariahmotorsports.com/
-Dent and Rust repair
-Original Tornado Silver Metallic with red double pinstripe

Wheels:
-Konig Rewind 15X7 4-110 20GRM $400 http://www.discounttire.com/dtcs/wheels/konig/size/viewProductDetail.do?pc=45469

Interior:
-Autopower Roll Bar, Bolt-In, Race $548http://www.mariahmotorsports.com/
-Auto Meter ES Series Wideband Air/Fuel Gauge $300
-Auto Meter ES Series Analog Oil Pressure, Full Sweep, Electrical Gauge
-Auto Meter ES Series Analog Water Temperature, Full Sweep, Electrical Gauge
-Auto Meter ES Series Analog Oil Temperature, Full Sweep, Electrical Gauge
-Custom in dash gauge panel
-Molded Black Carpet Kit $280 http://www.blackdragonauto.com/icatalog/zr/full.aspx?Page=76
-Repair drivers side seat

Suspension:
-84-85 Front Spindles (already have in garage)
-RE-Speed Front Coil Over Kit, Road Race $125 [url]http://mrcmfg.com/catalog/product_info.php?products_id=234{26}126[/url]
-RE-Speed 2.5" ID x 8" Long, Coil Over Springs, Pair $99 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_89&products_id=235
-RE-Speed Rear Coil Over Kit $260 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_89&products_id=367
-TOKICO Illumina adjustable shocks $442 http://mrcmfg.com/catalog/index.php?cPath=112_41_89
-RE-Speed Camber Plate Kit $200 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_92&products_id=38
-RE-Speed Strut Tower With Firewall Brace $250 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_92&products_id=262
-RE-Speed Tubular Competition Sway Bar $250 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_92&products_id=264
-RE-Speed Rear Lower Control Arm Kit $250 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_92&products_id=67
-RE-Speed Lower Control Arm Spherical Kit $100 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_92&products_id=68
-Energy Suspension Polyurethane Complete graphite impregnated black bushings Kit $160 http://mrcmfg.com/catalog/product_info.php?cPath=112_41_91&products_id=153
-RE-Speed 1984 to 1985 Rear Axle Retainer Plates, Big Bearing $40 http://mrcmfg.com/catalog/product_info.php?cPath=112_69&products_id=182
-New Front lower ball joints $80
-Mazdatrix Watts Link Bracket Reinforcement $37.50 http://www.mazdatrix.com/getprice.asp?partnum=MZ-1-WATT
-Wheel studs $32

Steering:
-RE-Speed Stage II Rack/Pinion Conversion $750 http://mrcmfg.com/catalog/product_info.php?cPath=112_133&products_id=345
-Flaming River Manual Rack and Pinion Steering System $260 http://www.summitracing.com/parts/FLA-FR1520/


This is just the Begining I still have the motor to add.

[Originalguy]

damn dude thats legit

[RX-7 Chris]

Motor:
-RE-Speed Version2, Billet Machined One Piece Oil Pedestal $70 http://mrcmfg.com/catalog/product_info.php?cPath=112_37&products_id=71
-Richard Sohn 12A Oil injector Pump Adaptor $86 http://www.rotaryaviation.com/oil_injector_pump_adaptors.htm
-Oil Tank $30
-Racing Beat MUFFLER UNIVERSAL 2.5" $108 http://www.mazdatrix.com/getprice.asp?partnum=16025
-Atkins Rotary Side Mount Alternator Kit $95 http://atkinsrotary.com/store/product.php?productid=16958&cat=0&page=1
-Camden 7" Supercharger $2395 http://www.camdensuperchargers.com/index.php?pag=402
-The list of things I need from Camden:
Microtech LTX10S$995.00
Microtech Handset $150.00
Bosch Coils$300.00
TWM Throttle Body $499.95TPS & Plug-In$140.00
Throttle Body Extensions$70.95
Throttle Body Air Horns$110.00
Injectors (4) $400.00
Top Injector Seats $11.00
Bottom Injector Seats $12.00
Tsunami Aeromotive Fuel Pump $292.99
Aeromotive Pressure Regulator $210.00

[RX-7 Chris]

Brakes:
-New front calipers with brackets $100
-Powerslot Front Rotors $256
-Hawk HPS Street brake pads $64

[speedjunkie]

That's quite a list! It's great to have goals lol.

[bellalyssa]

Lot's o' moneh. But I hope you can do it! It would be sick with all of that fun stuff on it.

[kingtut]

Hmmm...let's see- I'd say the oil tank's within reach.
Good luck Chris:)

[RX-7 Chris]

It will all happen as some point. Probably nothing will happen till next summer, have to get the wife through school first.

[iani1.1]

wow im guessing this list is just the basic essentials?

good luck on it. i gotta hold off on mine for a little bit

[MSP SuperStreet]

Hey, it all starts with a plan.
One mod at a time, then another, then another, then another...........
till..................oops wallet feels a little light.
But with car guys there ever seems to be an end to that plan.
The day dreaming never stops.

Let the journey begin.................

[RX-7 Chris]

wow im guessing this list is just the basic essentials?

good luck on it. i gotta hold off on mine for a little bit

Just the basics:lol:

[RX-7 Chris]

Hey, it all starts with a plan.
One mod at a time, then another, then another, then another...........
till..................oops wallet feels a little light.
But with car guys there ever seems to be an end to that plan.
The day dreaming never stops.

Let the journey begin.................

The journey began 10 years ago when I got the car, haha.
What I have done:
-Built streetport 12A motor
-2.5" exhaust with RB header and magnaflow muffler
-RB lightweight steel flywheel
-exedy clutch
-electric fan
-upgraded rear end
-FC water pump and housing
-FC main fuse block
-FC alternator
-SS brake lines
-Replaced starter, rear brakes, radiator, all hoses, countless other things.

I still need to have the GSL-SE tranny sitting in the garage rebuilt and install it.