IPT Carbon Fiber Engine Cover

Huzer21 · Postby **Huzer21** » Mon Mar 31, 2008 9:14

Well, I picked this up new in box, from someone that never used it. I just need to order (or transfer) the Mazda logo over to finish it off. I like it. Carbon fiber sure is light! It is the real deal, not a decal or paint. I like it. It'll match the MS strut bar nicely.

Postby **RX-7 Chris** » Mon Mar 31, 2008 9:14

Looks good. Will you have to trim it to fit the strut bar like you did on the old cover?

Huzer21 · Postby **Huzer21** » Mon Mar 31, 2008 9:14

<div class='quotetop'>QUOTE (RX-7 Chris @ Mar 31 2008, 05:05 PM) [url=index.php?act=findpost&pid=36872]<{POST_SNAPBACK}>[/url]</div>

Looks good. Will you have to trim it to fit the strut bar like you did on the old cover?[/b]

Yup, I'll have to trim and sand it like the other one. The dremel is ready to go!

Colombia28 · Postby **Colombia28** » Mon Mar 31, 2008 9:14

Very nice. Cant wait to see it on!

GR-8 · Postby **GR-8** » Mon Mar 31, 2008 9:14

You lucky bastard.......I want one but don't want to spend the fortune.

If you don't mind me asking how long did you get it for.

Huzer21 · Postby **Huzer21** » Mon Mar 31, 2008 9:14

I got it for $150 shipped. I'll probably get it slapped on there this weekend, I hope.

tsx_guy · Postby **tsx_guy** » Mon Mar 31, 2008 9:14

i lke the puppy paw blanket it is resting on.. looks good, a flying "M" will complete it.

Army RX8 · Postby **Army RX8** » Mon Mar 31, 2008 9:14

<div class='quotetop'>QUOTE (Huzer21 @ Mar 31 2008, 04:58 PM) [url=index.php?act=findpost&pid=36869]<{POST_SNAPBACK}>[/url]</div>

I just need to order (or transfer) the Mazda logo over to finish it off.[/b]

The Logo is held on with 3M sticky pad. With a steady hand and a knife you can take it off. Becareful though its just aluminum so it bends easy

GR-8 · Postby **GR-8** » Mon Mar 31, 2008 9:14

That's a great steel for it.

Huzer21 · Postby **Huzer21** » Mon Mar 31, 2008 9:14

<div class='quotetop'>QUOTE (Army RX8 @ Mar 31 2008, 07:04 PM) [url=index.php?act=findpost&pid=36900]<{POST_SNAPBACK}>[/url]</div>

The Logo is held on with 3M sticky pad. With a steady hand and a knife you can take it off. Becareful though its just aluminum so it bends easy[/b]

I think I'm just going to order a new one, it's about $8 for a new decal.

GR-8 · Postby **GR-8** » Mon Mar 31, 2008 9:14

If you wanna get rid of your old engine cover I may be intrested in. Mebe spray it different than mine. Plus my Flying M is has a dent in it from when I used to take it to lakewood.

Huzer21 · Postby **Huzer21** » Mon Mar 31, 2008 9:14

<div class='quotetop'>QUOTE (Greek8 @ Mar 31 2008, 07:06 PM) [url=index.php?act=findpost&pid=36903]<{POST_SNAPBACK}>[/url]</div>

That's a great steel for it.[/b]

Thanks, and I'll let you know about my engine cover once I get these swapped.

Huzer21 · Postby **Huzer21** » Thu Apr 03, 2008 9:14

Installed. I didn't like the velcro solution that came with the engine cover, so I cannibalized the mounting posts from the old cover and attached 'em. Now I gotta clean up the engine bay a little bit. It's dirty in there!

Colombia28 · Postby **Colombia28** » Thu Apr 03, 2008 9:14

*drool* Tim i want to see this in person!! Looks so good!

LM · Postby LM » Thu Apr 03, 2008 9:14

You dirty little.....WOW....SEXY!!!

IPT Carbon Fiber Engine Cover

Who is online