Page 2 of 3
Posted: Mon Aug 22, 2011 9:14
by RX-7 Chris
Shadowden wrote:Thanks! My wife is running the Outward Bound Relay, and that gives me the opportunity to focus on the car some. Will likely start the Camber arms Thursday night at 7:00p and continue in with the rear springs that night or early Friday morning (I don't think you need a spring compressor), then getting the compressor and doing the fronts on Friday morning as well. Not sure it's a good plan, but it's a plan.
I start school this week too...only 1 class since I work full time, but it should be interesting. Analytical Mechanics II (Dynamics) at UCD.
Junkie, I figured you were deploying (why the heck do you guys get deployed so frequently out of Carson?), so thought it would be good for you to get out with the group on a cruise.
He's in the USAF.
You can probably do the free rental at the parts store for the compressor.
Posted: Mon Aug 22, 2011 9:14
by Shadowden
Canned due to lack of interest
Posted: Mon Aug 22, 2011 9:14
by geo2maz
Shadowden wrote:9:00a
eeeek!
Posted: Mon Aug 22, 2011 9:14
by Shadowden
geo2maz wrote:eeeek!
Since I planned to have people hangout for a bit, you don't have tobe there that early.
However, if the group decides that is too early, we can discuss a different time as well. I was gonna say 8:00, but that would be too much time between meeting and eating:o
Posted: Thu Aug 25, 2011 9:14
by Shadowden
Some more things in the works thanks to RX7_Chris and D Walker!
Posted: Sat Aug 27, 2011 9:14
by Colombia28
I hope to be able to make it, but i got a new job so i can't guarantee i'll be able to.
Also Ryan sorry for not getting back to you about helping out Friday. Hope the installs went well!
Posted: Mon Aug 29, 2011 9:14
by Shadowden
Colombia28 wrote:I hope to be able to make it, but i got a new job so i can't guarantee i'll be able to.
Also Ryan sorry for not getting back to you about helping out Friday. Hope the installs went well!
I worked on them pretty much non stop from 7:00p Thursday until 6:30 a Friday. No issues and went well, but it took a lot longer for me to do because 1, I sheared a strut mount bolt, 2: had to do the rear passenfger spring twice, 3: getting the rear passenger side camber arm really was a big PIA. I got it all on though!
Posted: Mon Aug 29, 2011 9:14
by Shadowden
I am working with G2 to support this event. They seem to be pretty interested.
For those not familiar with G2 (get out from under your rock:D) check out their web site
http://www.g2usa.com.
Posted: Mon Aug 29, 2011 9:14
by Colombia28
Shadowden wrote:I worked on them pretty much non stop from 7:00p Thursday until 6:30 a Friday. No issues and went well, but it took a lot longer for me to do because 1, I sheared a strut mount bolt, 2: had to do the rear passenfger spring twice, 3: getting the rear passenger side camber arm really was a big PIA. I got it all on though!
Good to hear that it all went well! Sooooooooo, hows it look? Pictures?
Shadowden wrote:I am working with G2 to support this event. They seem to be pretty interested.
For those not familiar with G2 (get out from under your rock:D) checj out their web site
www.g2usa.com.
This is neat! Thanks for setting this up.
Posted: Mon Aug 29, 2011 9:14
by Shadowden
Colombia28 wrote:Good to hear that it all went well! Sooooooooo, hows it look? Pictures?
Curious where that dent in the lower rear door came from:(
I like how it looks. The setting I had the rear camber arms didn't allow enough adjustment by the mechanic, so he did the fronts, then sent the car home with me to readjust the rears and bring the car back. Did so this morning and the car is now properly aligned. I haven't seen it yet, but I imagine it looks much the same (maybe a little more tuck in the rear).
Posted: Tue Sep 20, 2011 9:14
by Shadowden
With the planned event being only 5 days away, who is planning on coming?
Posted: Tue Sep 20, 2011 9:14
by kingtut
Shadowden wrote:With the planned event being only 5 days away, who is planning on coming?
Welcome to CMZC.
Posted: Wed Sep 21, 2011 9:14
by Shadowden
If I don't hear anything from anybody before Thursday at 6:00p, I'll shorten the idea up to lunch at the Sedalia Grill with kingtut.
Posted: Wed Sep 21, 2011 9:14
by eliminster
i might go just depends on what the wife wants and she hasn't made up her mind.
Posted: Wed Sep 21, 2011 9:14
by tsx_guy
Shadowden wrote:If I don't hear anything from anybody before Thursday at 6:00p, I'll shorten the idea up to lunch at the Sedalia Grill with kingtut.
ha ha ha.... "dining with tut"