HPR June 15th Open Lapping Day
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
I will bring out one or both of the RX8's and those with cars "in progress" or broken can maybe take a few laps or something.
Also Dave if you need help let me know, can likely help you get out on track.
My buddy Dimitri is 6'2 and 200-something and he fits in his FD with a helet with no issue, so not sure why you guys are having so much trouble :-p
Also Dave if you need help let me know, can likely help you get out on track.
My buddy Dimitri is 6'2 and 200-something and he fits in his FD with a helet with no issue, so not sure why you guys are having so much trouble :-p
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
- speedjunkie
- Senior Member
- Posts: 5337
- Joined: Wed Jan 02, 2008 9:14
- Location: Colorado Springs
- Contact:
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
D Walker wrote:My buddy Dimitri is 6'2 and 200-something and he fits in his FD with a helet with no issue, so not sure why you guys are having so much trouble :-p
Well I'm 6'6" so that's part of it, Eric is 6'4", so we are taller. I thought Eric would have a better shot of fitting but I guess not. Even at 6'2" I bet he isn't comfortable.
speedjunkie wrote:I knew it! lol
I'm actually looking at a Bride Gais seat on RCC right now, guy is selling it for $300. Although I'm not sure if it's authentic or a Taiwan replica.
Bride seats = made for small Asians haha. Plus that's stupid cheap, I bet it's a replica. Not to mention I don't think you will fit very well in it.

I carry Sparco seats and some others. I am not a fan of Bride seats much at all myself.
We managed to fit Jason Saini, who is I think 6'4/275 in the RX8 but it was a slightly tight fit. The seat mount I made gets the seat very low, might work for you guys?
Anyway, at this point I am planning on bringing out the pair of cars if you guys want to take a couple laps in them.
We managed to fit Jason Saini, who is I think 6'4/275 in the RX8 but it was a slightly tight fit. The seat mount I made gets the seat very low, might work for you guys?
Anyway, at this point I am planning on bringing out the pair of cars if you guys want to take a couple laps in them.
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
My dad has the day off and I'm trying to convince him to have a nice ride on his Harley up to the track so I can give him a ride.
So who all is still coming?
So who all is still coming?
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
The paddock runs east-west. Maybe we could try meeting in the NW corner of the paddock?
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
Just saw this:
[ame="http://www.youtube.com/watch?v=YRGre456cNs"]High Plains Raceway F1 rFactor simulation - YouTube[/ame]
http://www.drivingforcemotorsports.com/hpr.htm
Pretty kool!!!!
[ame="http://www.youtube.com/watch?v=YRGre456cNs"]High Plains Raceway F1 rFactor simulation - YouTube[/ame]
http://www.drivingforcemotorsports.com/hpr.htm
Pretty kool!!!!
[font="Century Gothic"]APR 4 Program Tune - AEM CAI - Vogtland Suspension
JVC KW-NX7000bt HU - eD 6500 Front Comps - cDT EF-61's Rear fill -IDMAX 10" sub-
JL 1000/1 - JL 450/4 [/font]
Past:

Current:

JVC KW-NX7000bt HU - eD 6500 Front Comps - cDT EF-61's Rear fill -IDMAX 10" sub-
JL 1000/1 - JL 450/4 [/font]
Past:

Current:

Operator wrote:Just saw this:
High Plains Raceway F1 rFactor simulation - YouTube
http://www.drivingforcemotorsports.com/hpr.htm
Pretty kool!!!!
I've been running some laps in rFactor to get some practice.
And a trailer and/or canopy would be great. I need a place to put my gas cans and all the junk from inside my car hehe.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
-
eliminster
- Senior Member
- Posts: 202
- Joined: Mon Aug 22, 2011 9:14
- Location: colorado springs
- speedjunkie
- Senior Member
- Posts: 5337
- Joined: Wed Jan 02, 2008 9:14
- Location: Colorado Springs
- Contact:
chickenwafer wrote:Bride seats = made for small Asians haha. Plus that's stupid cheap, I bet it's a replica. Not to mention I don't think you will fit very well in it.
He said it was made in Canada by an authorized dealer or something like that, but now he's not selling it anymore anyway. Oh well.
I just remembered this is on a Friday anyway, and I'm stupid busy at work, so that wouldn't happen anyway.
FYI, if you are doing the afternoon session like myself, mandatory show time is 12:40pm. I plan to be at the track by 11am.
[font="Century Gothic"]APR 4 Program Tune - AEM CAI - Vogtland Suspension
JVC KW-NX7000bt HU - eD 6500 Front Comps - cDT EF-61's Rear fill -IDMAX 10" sub-
JL 1000/1 - JL 450/4 [/font]
Past:

Current:

JVC KW-NX7000bt HU - eD 6500 Front Comps - cDT EF-61's Rear fill -IDMAX 10" sub-
JL 1000/1 - JL 450/4 [/font]
Past:

Current:

Who is online
Users browsing this forum: No registered users and 43 guests
