AuroraAxela's Speed3 Build

General Car Related Discussion
Post Reply
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

AuroraAxela's Speed3 Build

Postby AuroraAxela » Tue Sep 03, 2013 9:14

When I bought this car, it was at 35,100 miles and in overall really good shape. Lightly modified by one of the previous owners, and missing a couple of items, but a really good car with no evident problems.

First mod, naturally, was a COBB AccessPort.

Today I got a chance to get her on a lift and poke my nose around to see what's what. Did an oil change, changed the trans fluid to FoMoCo XT-M5-QS synthetic fluid. Some things I didn't get pics of, such as the JBR short shift plate, solid shifter bushings, and what is suspected to be a short throw shifter as well.

She has this weird intake that I can't identify, with a K&N filter....
Image

....and a rear motor mount which we suspect is a JBR, but it's very stiff and I will probably swap it out for a lighter duro. I still have the RMM from my 3's build, so I'll give that one a try.
Image

Someone also got rid of the second resonator, which I discovered today as well.
Image

Then I put some of the goodies I got off my 3 build to use for the Speed and installed them. My CorkSport interior LEDs are installed, my CP-e license plate bracket awaits plates, and I put on my NRG shift knob I got from Ryan a while back. Now the shift pattern is wrong, however, so I may find a new knob. I'm going to see if my strut tower brace will fit.

And, of course, there were my MS6 wheels...
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]

[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
I`m Batman
Senior Member
Posts: 935
Joined: Tue Feb 03, 2009 9:14
Location: Castle Rock

Postby I`m Batman » Wed Sep 04, 2013 9:14

Nice!

That intake is definitely made for some other car. I would like to see what the fuel trim looks like with that SRI.
Image Image
Top
coloskydiver
Senior Member
Posts: 845
Joined: Tue Jan 22, 2008 9:14
Location: Aurora, CO
Contact:
Contact coloskydiver

Postby coloskydiver » Wed Sep 04, 2013 9:14

Congrats! I love the white and sounds like everything worked out. Happy modding
[SIGPIC][/SIGPIC]
2005 Nissan Nismo Frontier-Supercharged- SOLD
2006 Speed 6- SOLD
2008 Scion Xd- SOLD
1990 Miata- SuperCharged 331 Fuel Injected Small Block Ford V8-SOLD
2008 Ford F250 Super Duty- Current
2014 Factory Five 818S- In Progress
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Sun Sep 22, 2013 9:14

So, recent improvements: got the rear motor mount from my 3 installed instead of that massive JBR mount, and it's much more manageable. Finally identified the intake as one for a Subaru. Traded off the JBR short shift plate for a rear cargo cover. Got new tint installed. Swapped out my BPV for a black Forge v1.

I got a new grille insert without holes in it from license plate brackets, and installed my TowPlate when I got my tags...
Image

Today I installed my new HTP 3" intake/TIP pipe, powdercoated white. It makes nice noises :) MAF calibration/tuning have begun.
Image

And finally, got my KSport coilovers installed today as well. The height needs a little more adjustment, but so far I like it a lot. Just need to learn to go REALLY slow over speedbumps...
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
mOOsE
Posts: 878
Joined: Wed May 14, 2008 9:14
Location: Fredericko
Contact:
Contact mOOsE

Postby mOOsE » Mon Sep 23, 2013 9:14

nice. MS6 wheels ftw. I did the same
Top
User avatar
I`m Batman
Senior Member
Posts: 935
Joined: Tue Feb 03, 2009 9:14
Location: Castle Rock

Postby I`m Batman » Mon Sep 23, 2013 9:14

Nice! I likey.
Image Image
Top
User avatar
Mortose
Senior Member
Posts: 415
Joined: Sun Jan 22, 2012 9:14
Location: Colorado Springs, CO

Postby Mortose » Mon Sep 23, 2013 9:14

Just go fast over a couple speed bumps, and just bend the pinch welds in. lol
Top
User avatar
kingtut
Posts: 2729
Joined: Mon Jul 07, 2008 9:14
Location: a secret place
Contact:
Contact kingtut

Postby kingtut » Tue Sep 24, 2013 9:14

AuroraAxela wrote:

... and I put on my NRG shift knob I got from Ryan a while back. Now the shift pattern is wrong, however, so I may find a new knob.


Any knob updates? Curious, how did Mr. Ryan feel about you hastily tossing out his knob, for a new knob?
one and one makes two, together we are free
Image
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Wed Sep 25, 2013 9:14

kingtut wrote:Any knob updates? Curious, how did Mr. Ryan feel about you hastily tossing out his knob, for a new knob?


LOL, it wasn't hasty. I love that knob. I'm thinking about redoing the shift pattern on it so I can put it back in. I just didn't want to risk a situation where someone else drives the car and puts it in the wrong gear and then.......
You know? ;)

Oh, and got my ride height set where I want it.
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Fri Nov 01, 2013 9:14

Second cat delete with an Auto Grimmig test pipe. Little bit more growl now. I like.
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Sun Nov 03, 2013 9:14

Today installed my Defi Red Racer boost gauge, with a CP-e defroster mount. The gauge responds perfectly, does self-tests on startup, and the color matches well with my dash, both when the lights are off, and when the dimmer works. The pictures don't really look like the color matches, but it does when you're sitting in the car. I love it.
www.edgeautosport.com
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
User avatar
geo2maz
Posts: 1250
Joined: Sun Jun 21, 2009 9:14
Location: Denver
Contact:
Contact geo2maz

Postby geo2maz » Mon Nov 04, 2013 9:14

looks great! don't forget to get some gas
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]
Top
User avatar
_AlexTM
Senior Member
Posts: 522
Joined: Mon Mar 12, 2012 9:14
Location: Westminster

Postby _AlexTM » Mon Nov 04, 2013 9:14

+1^ for geo
SOLD 2004 Mazda3 hatch

2004 Java Black Pearl Forester XT :D
Top
User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Sat Nov 09, 2013 9:14

Daytime pic:
Image

Also, fixed the shift knob that I love, so it went back in the car today.
Image
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
Top
OrangeVirus
Member
Posts: 50
Joined: Tue Nov 22, 2011 9:14
Location: .

Postby OrangeVirus » Sun Nov 10, 2013 9:14

Where did you run the wiring and tube for the gauge, did you have to drill a hole?
Top
Post Reply

Return to “Car Chat”

Who is online

Users browsing this forum: No registered users and 23 guests