If there are any of you out there who have been searching for a competent, experienced rotary engine builder I just got off the phone with the guy who built mine. I am not an employee and i apologize if I am violating any rules of the board by posting this, but I had to research and spend weeks looking for someone who could build a strong performance rotary on a budget that real people can afford. I just want to share my experience with other like minded sickos who like lots of power from a wee little 1.3 or 1.2 liter engine. Here's the link:http://www.rotarywarehouse.com/index.php
I have over 7000 miles on my raceport 13b that was done for me and it runs smooth, makes a ton of power, and the oil doesn't even get dirty over oil change intervals. These guys do good work and it won't cost and arm, a leg and you first born to get your engine rebuilt correctly.
Just wanted to shre. Sorry, I can't seem to make the link insert option work right.

good fine sir, thanks for sharing. According to the CMZC's handbooks you have violated rule #1003.5
section 2 paragraph IV. As a result swift action will be taken. I have dispatched two thugs to break
your kneecaps and no they won't be gentle, have a nice evening j/k [img]http://coloradomazdaclub.com/forums/style_emoticons/<#EMO_DIR#>/laugh.gif[/img]

<div class='quotetop'>QUOTE (6i_guy @ Nov 11 2007, 07:37 PM) [url=index.php?act=findpost&pid=10308]<{POST_SNAPBACK}>[/url]</div>

good fine sir, thanks for sharing. According to the CMZC's handbooks you have violated rule #1003.5
section 2 paragraph IV. As a result swift action will be taken. I have dispatched two thugs to break
your kneecaps and no they won't be gentle, have a nice evening j/k [img]http://coloradomazdaclub.com/forums/style_emoticons/<#EMO_DIR#>/laugh.gif[/img][/b]

The good news is that they will be driving a 6i, so they won't be able to catch you to break your knees, and if they do, just threaten to scratch their car. They'll get scared. [img]http://coloradomazdaclub.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif[/img]

<div class='quotetop'>QUOTE (Stealth01 @ Nov 11 2007, 07:55 PM) [url=index.php?act=findpost&pid=10311]<{POST_SNAPBACK}>[/url]</div>

The good news is that they will be driving a 6i, so they won't be able to catch you to break your knees, and if they do, just threaten to scratch their car. They'll get scared. [img]http://coloradomazdaclub.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif[/img][/b]

Sorry a lil off topic,, but stealth,, did you have to use a pic of all of our cars where Im the only car with the lights off cause your to slow to take a pic? LOL

<div class='quotetop'>QUOTE (Memphis @ Nov 11 2007, 08:49 PM) [url=index.php?act=findpost&pid=10312]<{POST_SNAPBACK}>[/url]</div>

Sorry a lil off topic,, but stealth,, did you have to use a pic of all of our cars where Im the only car with the lights off cause your to slow to take a pic? LOL[/b]

lol thread jacker!! j/k but back on topic thats a good thing to know if/when my engine goes out. is the guy in colorado?

<div class='quotetop'>QUOTE (Memphis @ Nov 11 2007, 08:49 PM) [url=index.php?act=findpost&pid=10312]<{POST_SNAPBACK}>[/url]</div>

Sorry a lil off topic,, but stealth,, did you have to use a pic of all of our cars where Im the only car with the lights off cause your to slow to take a pic? LOL[/b]

LOL. I didn't even notice that. Of course, if you weren't too stingy to leave the engine running, then your lights would have stayed on!

<div class='quotetop'>QUOTE (OpacRX @ Nov 11 2007, 08:54 PM) [url=index.php?act=findpost&pid=10313]<{POST_SNAPBACK}>[/url]</div>

lol thread jacker!! j/k but back on topic thats a good thing to know if/when my engine goes out. is the guy in colorado?[/b]

Good to know since there seem to be a TON of older rotaries around here.

<div class='quotetop'>QUOTE </div>

lol thread jacker!! j/k but back on topic thats a good thing to know if/when my engine goes out. is the guy in colorado?[/b]

Nope, he's now in Nevada. But his prices are awesome and shipping was $300 when I sent mine to CA for him to build, so I imagine it will be a little cheaper to NV.
I was on the phone with him for a few minutes and they are going to give me all the tech info like port timing etc. when I start mapping my efi sysytem...when I put it together.


As for the thugs coming to my door, you better send more than two! LOL!!!

Wow thats really awesome thank you for sharing the info Gold!

That's what forums are for, sharing info. I'm just trying to be useful.

That's good to know, I've been looking for a good shop that does not rip you a new one.

now hold up where is this shop at

http://www.rotarywarehouse.com/index.php

371 HWY 395 South
Gardnerville, Nevada 89460

775-230-0133
916-617-6773

Monday - Friday: 8:00 AM - 6:00 PM
& Saturday: 9:00 AM - 4:00 PM
Sunday: Closed