• FMIC Install

Posted: **Tue Apr 14, 2009 9:14**

Mine came in...anyone want to help me install it....reward may be given ;P

Posted: **Wed Apr 15, 2009 9:14**

I don't know much about removing the front bumper, but I'd be willing to lend a hand.

Posted: **Wed Apr 15, 2009 9:14**

Do we have to drive up to WY?

Posted: **Wed Apr 15, 2009 9:14**

it could definatly be made into a day then lol, and lots and lots of beer, on me of course

Posted: **Wed Apr 15, 2009 9:14**

If its down here I would be willing to help out.........I also have not removed the front bumper but it could be figured out.

Posted: **Wed Apr 15, 2009 9:14**

If you really want it installed, i will help you out. Just let me know when.

Posted: **Wed Apr 15, 2009 9:14**

I can come to denver...just need a garage and to tune the standback so i can drive home....and I think my exhaust came in today, i have a huge box i havnt opened yet so

But yea, if i can get a garage and tools and everyone together, we could even make a meet/bbq out of it

Posted: **Wed Apr 15, 2009 9:14**

I can host on Sat the 18th. I've got tools, jack, jackstands. More tools are always welcome. Plus we can celebrate my b-day early

Posted: **Thu Apr 16, 2009 9:14**

I am down to help out as well. We can celebrate my bithday early as well.

Posted: **Thu Apr 16, 2009 9:14**

I would help, I have a fmic that eric helped me with, but I am only in town for 38 hours in the next week.

Posted: **Thu Apr 16, 2009 9:14**

Supposed to snow on Saturday....not sure if you want to do it then. Not so good for a BBQ or working in the garage.

Posted: **Thu May 07, 2009 9:14**

Ok so I have these parts in my garage ready to be installed...all that is left is a garage, tools, peeps and beer, in which case I will provide the beer and food!

1 of : AutoExe Front Stabilizer Sway Bar: MAZDASPEED 6
Shipped 1 of : AutoExe Member Brace Set (5 Pieces): MAZDASPEED 6
Shipped 1 of : AutoExe Rear Floor Cross Bar: MAZDASPEED 6 and Mazda 6
Shipped 1 of : AutoExe Rear Stabilizer Sway Bar: MAZDASPEED 6
Shipped 1 of : AutoExe Strut Tower Bar: MAZDASPEED 6
Shipped 1 of : SPC Front Camber Adjustable Ball Joint: MAZDASPEED 6, Mazda 6
Shipped
1 of : CPE Front Mount Intercooler: MAZDASPEED 6 [Color:Custom Color Please][Enter Custom Powdercoat Color:Gunmetal]
1 of : StreetUnit High Performance Silicone Upper Radiator Hose: MAZDASPEED 6 [Color:Gloss Red]
Shipped
Shipped 0 of : StreetUnit StiffDiff Rear Differential Brace Upgrade: MAZDASPEED 6
Shipped

Posted: **Thu May 07, 2009 9:14**

Im looking at either the 16th or 17th of May

Posted: **Thu May 07, 2009 9:14**

If you where closer, I'd be all over helping with this.

Posted: **Thu May 07, 2009 9:14**

Good luck with that rear sway bar. I hear it is a bitch and a half, but at least you are doing that one and the stiff diff at the same time. I hear it is easier that way.

i would help, but I've got my Mom's bday and my other Mother in laws Mother's day stuff to do that weekend. Good luck on the install. Eric (Firestoned) helped me out a lot with my FMIC install.