Engine Oil Loss help

General Car Related Discussion
User avatar
Shadowden
Posts: 2288
Joined: Fri Aug 05, 2011 9:14
Location: Highlands Ranch
Contact:

Engine Oil Loss help

Postby Shadowden » Thu Feb 02, 2012 9:14

So a little while back, I found out that my car was running low on oil. Figured the guys that changed my oil left it short. Same issue happened today. We discussed the possibility of the PCV valve being bad in chat today and that seems to come up a bit in searches. Tonight, when I got home, I decided to look around more. Disconneced the tube that goes from the air intake to the back of the case. It had oil in it. Then decided to pull the coils off. 1 & 4 were dry, 2&3 had oil in them. Other than learning how to remove a couple of different clips and my coils, I didn't figure anything out as I don't know if this is normal or not. I tend to doubt that oil in that hose is normal as it would seem it should be sucking in air through there, not puking oil out. As far as the area near the spark plugs, that doesn't seem right either.

Fail on the paper test. Started car, opened oil filler cap and tested to see if a heavyweight envelope would suck down. Only thing that happened was it tried to fly off. Fluttered.

Help would be very appreciated.

Thanks,
Ryan

User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Thu Feb 02, 2012 9:14

Oil in spark plug tubes usually indicates valve cover gasket set. At least the tube seals.
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]

[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]

User avatar
D Walker
Senior Member
Posts: 437
Joined: Mon Mar 14, 2011 9:14
Location: Aurora

Postby D Walker » Thu Feb 02, 2012 9:14

swing it by and we can take a look at it man
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff

RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Thu Feb 09, 2012 9:14

did you ever get this worked out?
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
Shadowden
Posts: 2288
Joined: Fri Aug 05, 2011 9:14
Location: Highlands Ranch
Contact:

Postby Shadowden » Thu Feb 09, 2012 9:14

I ended up just having Pat do it and got the car back last night. He did a great job. Valve cover gasket, PCV valve and Intake Manifold Gasket. I need to monitor the oil now to be sure there isn't something else going on.

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Thu Feb 09, 2012 9:14

glad you got it worked out.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
kingtut
Posts: 2729
Joined: Mon Jul 07, 2008 9:14
Location: a secret place
Contact:

Postby kingtut » Thu Feb 09, 2012 9:14

Glad to hear Shadow...kudos to Pat and Dong.
one and one makes two, together we are free
Image

User avatar
AuroraAxela
Posts: 397
Joined: Wed Dec 14, 2011 9:14
Location: Aurora, CO

Postby AuroraAxela » Thu Feb 09, 2012 9:14

Typo?
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]


[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]

User avatar
D Walker
Senior Member
Posts: 437
Joined: Mon Mar 14, 2011 9:14
Location: Aurora

Postby D Walker » Thu Feb 09, 2012 9:14

no just Tuts humor
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff



RX8 World Chalenge Touring Car #7

RX8 World Challenge Touring Car #8

User avatar
kingtut
Posts: 2729
Joined: Mon Jul 07, 2008 9:14
Location: a secret place
Contact:

Postby kingtut » Thu Feb 09, 2012 9:14

A sign of affection...if you will.
one and one makes two, together we are free

Image

User avatar
Shadowden
Posts: 2288
Joined: Fri Aug 05, 2011 9:14
Location: Highlands Ranch
Contact:

Postby Shadowden » Thu Feb 09, 2012 9:14

Service was excellent. Don is a racing nerd (I think he knows this), so I learned a good bit about racing past. Apparently those old codgers knew what was up. They, unlike most shops, were also open to answering my dumbass questions and explaining their points of views on them. Really, it was a good experience, the only thing that would have been better is if I could have taken the day off and spent it there "helping".

It is an interesting shop to be in. Everything in there with the exception of my mz3 was either turboed, or purpose built for racing...no other grocery go getters.:lol:

Valve cover off, Intake manifold removed. Little sneak peak of something I tried the other day included as an extra.


Image

Picture courtesy of secondgenpat

User avatar
D Walker
Senior Member
Posts: 437
Joined: Mon Mar 14, 2011 9:14
Location: Aurora

Postby D Walker » Thu Feb 09, 2012 9:14

I am a racing nerd, there is no doubt. When you are a part of it, living it and breathing it you just never stop learning about racing, its history, and how this great sport came to be.
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff



RX8 World Chalenge Touring Car #7

RX8 World Challenge Touring Car #8

User avatar
Number2
Posts: 807
Joined: Tue Mar 17, 2009 9:14
Location: Denver

Postby Number2 » Thu Feb 09, 2012 9:14

Glad to hear you got it taken care of!
"Littering, and?..."
Image


Return to “Car Chat”

Who is online

Users browsing this forum: No registered users and 110 guests