So far the hot start issues seem to be resolved, and it hasn't been hunting when starting normally, only when starting and turning off over and over. When we were meeting up on Saturday to drive to Golden, the car was idling with AC on and it died suddenly, but Joe changed a couple things while we w...

I drove it to work Tuesday and it died on me on the way home, in rush hour traffic, and was hard to start again, which ended up popping my circuit breaker and not letting me reset it for another minute. WTF I guess I was a little too cocky using AC haha. So I tinkered with the hot start fueling, and...

I finally found all the info I needed and got the AC sorted out, partly with Joe's help, and some guys from the forum. I played with the settings and got them as good as I could. Final AC 1.jpg Final AC 2.jpg Then I took the car out to finish up boost tuning, and ended up finding a couple failure po...

I did some testing tonight and it works, kinda. Since my AC request switch input is around 3.1-3.2v, I changed on to 3.5v and off is still 5v. I had to up the idle increase from 70 to about 200RPM because the engine kept dying with only 70RPM increase. I eventually changed it to 100RPM. And of cours...

I took the car to Travis at JC Repair today to get the AC charged. He got it charged, but the compressor isn't getting power for some reason, so basically I still don't have AC lol. And when I picked up the car, the check engine light was on and it was P1301 trigger reference error. I cleared it and...

I bought some 21/32" freeze plugs and Xcessive got back to me and I bought a couple freeze plugs from them too, but I'm not sure either one has shipped, so it sucks that I probably won't be able to drive the car this weekend. Ugh. And I had to cancel my appt to get AC charged today also. I real...

I was doing boost tuning today and on the last run I heard a huge boost leak, and when I let off the car was idling at 4-5k haha. Turns out one of the freeze plugs popped out. Was an interesting drive home haha.

I bought some pulleys on eBay that comprises the crank, alternator, stock size water pump, and power steering pulleys. I wanted it for the smaller water pump pulley, which I've been wanting for a while. I installed the alternator and crank pulleys as well, but I'm gonna sell the power steering pulle...

I did some testing with the EVAP system yesterday, changing the frequency and driving around. I had already changed the duty cycle to 40 all across and changed frequencies between 5hz, 100hz, and 200hz, and then removing the fuel cap. I had pressure come out on 5hz and 100hz after driving around, bu...

I pulled out some coolant last night and replaced the thermostat with the 180F, and I discovered the issue I was having. https://live.staticflickr.com/65535/53078350105_6203eb5560_k.jpg 2023-07-28_04-03-35 by Eric Jausel , on Flickr I also changed the screws in the door sills because the holes keep ...

I guess my alarm issue is back, setting automatically when I close the doors whether they're locked or not. I drove the car on Sunday and noticed the temps still getting kinda high. It was hot and I did drive slowly through Manitou Springs driving my temps up and then got on 24 pushing it up through...

I changed some water injection settings today, testing different frequencies, and bled the coolant again. And I worked on it again tonight to check the full range of frequencies. It seems as though the frequency is somewhat closely related to the injector duty cycle; at 30hz, it starts injecting at ...

I finally got around to bleeding the coolant system, and I realized just prior that to flush the reservior, so I did that too. I ran it for probably a couple hours, paused for dinner, and ran it another 30-45 minutes, because it wouldn't ever get rid of the bubbles completely. It was just small bubb...

Joe got water injection working last week. The frequency was incorrect, set at 100hz instead of 20-30hz as I've since learned from Rodney at ProMeth. Joe set it to 25hz, but it's only injecting between 60-100% duty cycle, really only starting to spray at 70% with water slowly dripping out at 60%. Ch...

I went to 7s day yesterday and did a fun drive through the mountains with Brett, Brian, and Simon. I hit 220F coolant temp on that drive, and coming back home on I25 through Denver I hit 221F, and then I remembered I could turn on my fans with the AC switch and my temps started dropping immediately....